Kawasaki VN750 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I am looking for both front rotors for a 92 vn 750. Mine are serverly scored and im just trying to save some money.
 

·
Registered
Joined
·
856 Posts

·
Banned
Joined
·
10,354 Posts
Further note...these rotors are NOT designed to be cut...one can take off some glazing on them, but tollerances are tight...so be careful what you get....make sure anything you buy is within range....

Service limit is 4.5mm....stock is 5.1 to 4.8mm
 

·
Dr. Vulcanstein
Joined
·
1,536 Posts
Further note...these rotors are NOT designed to be cut...one can take off some glazing on them, but tollerances are tight...so be careful what you get....make sure anything you buy is within range....

Service limit is 4.5mm....stock is 5.1 to 4.8mm
If you buy from eBay ONLY buy from a seller who has listed the thickness. I've bought a set in the past and it was from a trusted seller who took the time to label all his parts, which means they ain't sloppy or careless sellers.
 

·
Banned
Joined
·
10,354 Posts
There ya go....listen to ^^^....
I can see some clown shavin old ones down, then yer pads wont hardly grab...reminds me, I need new front pads, lol....
 

·
FREEBIRDS MC CENTRAL NY
Joined
·
16,197 Posts

·
Banned
Joined
·
10,354 Posts
I did the drum shoes, never done the front pads since I got Bessie....past time....
 
1 - 7 of 7 Posts
Top