Kawasaki VN750 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
I am getting ready to cut the(r/bl) tail light wire at the junction box to power one of those led volt meters, but according to the Klymer wiring detail the red/bl wire that the home1.gte.net web page shows to cut does not go to the taillight???? Can anyone out there clear this up before I cut the wrong power wire?

Thanks in advance
 

·
Registered
Joined
·
115 Posts
youn2433 said:
I am getting ready to cut the(r/bl) tail light wire at the junction box to power one of those led volt meters, but according to the Klymer wiring detail the red/bl wire that the home1.gte.net web page shows to cut does not go to the taillight???? Can anyone out there clear this up before I cut the wrong power wire?

Thanks in advance
The wire is "red with a blue tracer". It's the top wire of the upper plug at the junction bloc. I wired my volt meter exactly like that and it works fine. That is the correct wire.
 
1 - 3 of 3 Posts
Top