Kawasaki VN750 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1 (Edited)
Hi all....my front brake lever has some slop because the piston on the master cyl is not popping out far enough...I have brake action, but the piston seems to hang up when it retracts....By not coming out far enough causes lever to not touch front brake micro switch...The brake light will stay on...How hard is it to remove piston, clean it up and expect it to perform right.. Bike is '86 Vulcan 750.....Thanks in advance, you guys always come through...
 

·
ass hole extaordinaire
Joined
·
3,780 Posts
i have no clue on this one but its funny that no one answered you even though you thanked them in advance
 

·
Banned
Joined
·
10,354 Posts
Are you talking about the brake cyl end, or the part on the MC itself ?...I believe you can get a rebuild kit for the MC.
 

·
ass hole extaordinaire
Joined
·
3,780 Posts
Are you talking about the brake cyl end, or the part on the MC itself ?...I believe you can get a rebuild kit for the MC.
wolfie this was originally posted 8/19/2012 i hope the prob has been solved by now lol
 
1 - 4 of 4 Posts
Top