Kawasaki VN750 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
anyone got an idea as to what size the steering stem is on a 750?

a guy i know is selling a custom front end, with billet slabs, and a 1" stem, just wondered if it would fit, or whether the kwak stem can be fitted to the slabs instead?
 

·
Sparky!!!
Joined
·
8,697 Posts
upper bearing is Inside DIA 28mm Outside DIA 52mm
lower bearing is Inside DIA 25mm Outside DIA 47mm

I am not sure on the length of the steering stem. Also I have not found any bearings for converting from metric to standard. The only thing I have found to make a Harley Tripple tree work is to get a Harley neck.

on another note.. a 1986-199? VN1500 BUBF front fork set up will bolt up with the aid of a spacer to take up slack in the steering stem.
 

·
Registered
Joined
·
28 Posts
Discussion Starter #5
no problem.. what size fork tubes are the Harley ones? ours use a 38mm fork, so yu might be able to use just the tubes.
no idea what size they are.
wouldnt think they would be much different to over there, though.
however, these slabs have kwak legs in, so hopefully should be a straight swap.
 

·
Sparky!!!
Joined
·
8,697 Posts
what OD the VN750 are are the slabs? I have leg information on Jap bikes

here is a list of Japanese bikes that have the same fork tube diameter as the VN750

38 Honda CR-125R (81-83)
38 Honda XR-250R (84-85)
38 Kawasaki KX-80R2/R3/R4/R5/R6/R7 (92-97)
38 Kawasaki KX-125 A6-A7 (80-81)
38 Kawasaki KDX-200 A1-A3 (83-85)
38 Kawasaki KX-250 A5-A7 (79-81)
38 Kawasaki KDX-400 A1-A2 (79-80)
38 Kawasaki KX-420 A1-A2 (80-81)
38 Kawasaki KL-600A1 "KLR" (84)
38 Kawasaki ZX-600C1-C6 "Ninja" (88-93)
38 Kawasaki ZX-600C7-C10 "Ninja 600R" (94-97
38 Kawasaki KL-650A1-A18 "KLR650" (87-04)
38 Kawasaki VN-700A1 "Vulcan" (85)
38 Kawasaki VN-750A2-A20 "Vulcan" (86-04)
38 Kawasaki ZX-750F1-F4 "Ninja" (87-90)
38 Kawasaki ZL-900A1/A2 "Eliminator" (85-86)
38 Kawasaki ZX-900A1-A3 "Ninja" (84-86)
38 Kawasaki KZ-1000C1-C4 "Police" (78-81)
38 Kawasaki KZ-1000J1-J3 (81-83)
38 Kawasaki KZ-1000K1/K2 "Ltd" (81-82)
38 Kawasaki KZ-1000P1-P20 "Police" (82-01)
38 Kawasaki ZL-1000A1 (87)
38 Kawasaki KZ-1100A1-A3 (81-83)
38 Kawasaki KZ-1100B1/B2 "GP" (81-82)
38 Kawasaki KZ-1100D1/D2 "Spectre" (82-83)
38 Kawasaki ZN-1100B1/B2 "Ltd" (84-85)
38 Suzuki RM-125 N/T/X/Z (79-82)
38 Suzuki RM-125 D (83)
38 Suzuki PE-175 Z/D/E (82-84)
38 Suzuki RM-250 N/T/X/Z (79-82)
38 Suzuki RM-400N/T (79-80)
38 Suzuki LS-650 FG/PG/FH/PH/PJ (86-88)
38 Suzuki LS-650 PS/PT/PV/PW/PX/PY/PK1/PK2/PK3 "Savage" (95-03)
38 Yamaha YZ-125 H/J/K (81-83)
38 Yamaha IT-175 J (82)
38 Yamaha IT-175 K (83)
38 Yamaha IT-250 H/J (81-82)
38 Yamaha YZ-250 D/E/F/G (77-80)
38 Yamaha FZR-400 U/SUC/W/SWC (88-89)
38 Yamaha FZR-400 A/SAC (90)
38 Yamaha YZ-400 D/E/F (77-79)
38 Yamaha IT-465 H (81)
38 Yamaha IT-465 J (82)
38 Yamaha YZ-465 G (80)
38 Yamaha XT-550 J/K (82-83)
38 Yamaha FZR-600 W/WC/AC/B/BC (89-91)
38 Yamaha FZR-600 RA/RAC/RB/RBC/RD/RDC/RE/REC (90-93)
38 Yamaha FZR-600 RF/RFC/RG/RGC/RH/RHC/RJ/RJC (94-97)
38 Yamaha XJ-600 SD/SDC/SE/SEC/SF/SFC/SG/SGC "Seca II" (92-96)
38 Yamaha XJ-600 SH/SHC/SJ/SJC "Seca II" (96-97)
38 Yamaha FZX-700S/SC/T/TC (86-87)
38 Yamaha XJ-700N/NC/S/SC "Maxim" (85-86)
38 Yamaha XJ-700 XN/XNC/XS/XSC "Maxim" (85-86)
38 Yamaha XV-700L/LC/N/NC "Virago" (84-85)
38 Yamaha XV-700CS/CSC/CT/CTC "Virago" (86-87)
38 Yamaha XV-700 J1/J1C (97)
38 Yamaha XV-750 U/UC/W/WC/A/AC/B/BC "Virago" (88-91)
38 Yamaha XV-750 D/DC/E/EC/F/FC/G/GC/H1/H1C/J1/J1C "Virago" (92-97)
38 Yamaha XV-1000 L/LC/N/NC "Virago" (84-85)
38 Yamaha XV-1100 S/SC/T/TC/U/UC "Virago" (86-88)
38 Yamaha XV-1100 W/WC/A/AC/B/BC/D/DC/E/EC "Virago" (89-93)
38 Yamaha XV-1100 F/FC/G/GC/H/HC/J/JC "Virago"


I don't have fork tube lengths though... (which is my only other front fork swap information I am missing)
 
1 - 6 of 6 Posts
Top