Kawasaki VN750 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter #1
Hi All,
I'm in the process of putting my bike together after replacing the stator and balance dampers. I was reading another thread about this and read that the outer cover, the one with 3 screws, needed to be removed for this process. Clymers also said to remove this but I didn't see any reason to so I didn't and everything came apart and went back together just fine. Did I cause any problems by not removing this cover first?
Thanks,
Rick
 

·
The Professor
Joined
·
3,147 Posts
Hi All,
I'm in the process of putting my bike together after replacing the stator and balance dampers. I was reading another thread about this and read that the outer cover, the one with 3 screws, needed to be removed for this process. Clymers also said to remove this but I didn't see any reason to so I didn't and everything came apart and went back together just fine. Did I cause any problems by not removing this cover first?
Thanks,
Rick
UH OH!! You are totaly screwed!! :doh: LOL

Just kidding!!:beerchug: No need to remove that cover. :beerchug:
 
1 - 2 of 2 Posts
Top