Kawasaki VN750 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi, new here but hoping I can get some help. I bought an 89 VN750 for $250
disassembled but in decent shape. Trying to build a bobber out of it, and it's going well so far. But does anyone here know where I could get a springer seat kit for around $150, trying to keep to a budget on the build. If anyone can help, I thank you.
 

·
On His Lady Vulcan
Joined
·
1,647 Posts
Build one!

You can get a pan off ebay for around $40, a gel pad for $25, springs for $30 and Joanne's or any other hobby fabric store has Vinyal for around $10 a yard.

$105 and you have your seat man.
 

·
Registered
Joined
·
13 Posts
easy fix .. u need to order any springer seat u want... ull need a piece if sheet metal the thicker the better and a drill ... find ur factory with/lengeh and angle .. cut the metal to size ... weld in ovet thr hole where ur seat was .... place ur new seat on the pan mark the holes .. drill ... mount .. :D
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
Thanks for the advice, found a setup with scissor springs for a little more than my target price, so I should be all set.
 
1 - 5 of 5 Posts
Top