Kawasaki VN750 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
77 Posts
Discussion Starter #1
I have had a little, and I mean a very little bit of oil coming from the chrome cap on the gearbox. It doesn't even drip, just a little bit of oil accumulated around the bottom of the chrome cap. I know there is a seal in there, I was just wondering how hard this is going to be to change as looking at the exploded view of it, it looks fairly difficult, but so did the exploded view of the splines and that was a piece of cake. I have searched and found a little info on it. Thank yall for any knowledge you may be able to share on this particular procedure.
 

·
Registered
Joined
·
245 Posts
After I did my engine rebuild mine popped out from the pressure created in the case. I just put some RTV silicone around it and plopped it back in. Seems to hold up just fine.

You can probably pop it off with a screwdriver.
 

·
Registered
Joined
·
77 Posts
Discussion Starter #4
Thank yall guys. I will be taking care of it tomorrow.
 
1 - 4 of 4 Posts
Top