Kawasaki VN750 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
115 Posts
Discussion Starter #1
I just bought a new to me left hand switch set. I installed it the other day and tested the turn signals, they worked then. I tried them again today, and the left side worls but the right side doesnt. It doesnt light up, it doesnt blink, the relay doesnt even click. I have no idea where to start looking. Any ideas? Im not to sure if if matters or not but my bike is an 86 and the switch came off of a 90. the plugs were the same, needed no modification to make it fit.
 

·
Registered
Joined
·
115 Posts
Discussion Starter #3
That was the first thing i checked, I guess i should have mentioned that. I also checked for power at the socket. No power at the rear signal, but good ground, i tested it. Also no power at the plugs in the harness for the right rear turn signal. Checked the front. Have power for the running lights, but no turn signal power. I am at a loss.....
 

·
Banned
Joined
·
448 Posts
X2 on the bad switch.
 
1 - 5 of 5 Posts
Top