Looking to sell as whole or part out my 2005 vn750 project. I can get pictures of anything you are interested in, just let me know. Or 1000 dollars whole. I can't keep the project going. If you have questions or you interested pm me and I'll tell you what I know.
Yep. Lithium ion battery that is a reverse terminal like the stock one and same CCA rating. The front suspension is progressive springs and matching heavy weight fork oil in the stock forks. The rear suspension is also progressive rear springs but they are an inch taller than stock. I wanted extra travel and the ability to load it down with gear. I do have the original rear shocks that could go with them if you want. They might be blown or they might just be empty. I'm not sure so I won't charge for them. The carbs are rebuilt pre emptively for the ear shave and the aftermarket exhaust. I didn't get there but the jets are all oversized according to the recommendations of the guide on this forum. The tuxedo mod was done by me and with the mounting plate from gc. That was fully tested to be working with no short between the stator and the rotor. The TOC MCCT are installed and the Reed gasket plates are installed with gaskets to seal and eliminate the emmision recirculation system.
Oh it also has a highly adjustable multi articulatic point handle bars. I do still have the stock handle bars. I wanted custom bent handle bars but I didn't know what kind of bend I wanted so I was trying multiple angles and heights with the adjustable ones. The stock ones are also available.
These are the after market levers. https://www.amazon.com/gp/product/B09DPPY6XS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
1 - 12 of 12 Posts
