Kawasaki VN750 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13 Posts
have a PPG paint dealer match the paint on your bike. cheapest way would be to have them give you the little aerosol <sp> cans that hook up to a glass/plastic cylinder and spray the paint on. Mask out the area you want to paint, plus about an inch over overlap on the existing paint, then wetsand it down, paint, westand (as long as it is not metallic), and clearcoat, and wetsand, then buff.

Depending on how good you are at fanning out the paint near the the overlap, you may need to remove the tape and wetsand around the painted area so it matches.

You probably won't get a perfect match though.

I would test the paint on a piece of sheetmetal before putting it on your bike!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top