[AshenG]

Hey guys. I was wondering if anyone anywhere has a picture of the other side of this vn750. I am looking for it because in this picture the rear break has been moved back and I'm interested in doing this to my foot controls. I'm hoping to get an idea of how they managed to move the shifter back on the other side.

This is where I found this picture.
https://bikebound.tumblr.com%2Fpost%2F147866851878

 

[Spockster]

Looks like a passenger peg and maybe the bracket too.

 

[AshenG]

I found one more from the front but it's the same side. I might end up just flipping and extending the shift lever backwards. I think my shifting will be reversed but that the only way I can think to manage it.

 

[Spockster]

I found one more from the front but it's the same side. I might end up just flipping and extending the shift lever backwards. I think my shifting will be reversed but that the only way I can think to manage it.

Flipping the shifter is what I was thinking they might've done. It will be 1st gear up and the rest down.

 

[Knifemaker]

They may have done something like this:

Which is basically how the rearsets on my RD400 worked.
Just some ball joints and threaded rod is what you’ll need.

Metal Ball Joints ( Left Hand thread ) M4 × 26mm × 4mm - 2pcs

Metal Ball Joints ( Left Hand thread ) M4 × 26mm × 4mm - 2pcs

hobbyking.com

 

[dirtrack650]

Interesting.

 

[Toone]

This is good.


Sent from my iPhone using Tapatalk