Kawasaki VN750 Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
81 Posts
Discussion Starter #1
Greetings to one'n'all

On the advice from a couple of the other members, I'm about to take the ignition switch apart. Does anyone have a diagram or photo of the inside to show what the springs etc should look like?

I took apart the controller off of a washing machine once and since then have a physical aversion to springs & balls in switches!!!

Or is it so simple that even a numpty can do it?
 

·
Linkmeister Supreme
Joined
·
7,960 Posts
Martin here is a link to Crobins photos of a teardown she did a year or so ago, of the cylinder lock and ignition switch.

http://www.vn750.com/forum/showthread.php?t=8998

There is a link in there to Diannas text description of getting inside the electrical switch to check wiring soldered to contacts, and cleaning contacts, etc.

There is also a link to global reckons 4 photos of the dismantled electrical switch, soldering, wires, dielectrical grease usage, etc.

I hope this helps.
 

·
Premium Member
Joined
·
81 Posts
Discussion Starter #3
Hi Gordon,

Thanks for that. I shall study prior to stripping it down
 
1 - 3 of 3 Posts
Top