Kawasaki VN750 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
112 Posts
Discussion Starter #1
So after recently completing my rebuild on my engine and setting everything up I seem to have lost all back light on gauges and dash light when you turn the key to start the bike. any ideas?
 

·
Super Moderator
Joined
·
2,570 Posts
1st off, make sure all the connections you not only had to deal with to remove then engine, but the ones you didnt mess with... then look at the JB (fuses).. and then the ign switch.

pay particular attention to the connections/wiring under the neck covers
 

·
..have a vulcan good day!
Joined
·
4,508 Posts
1st off, make sure all the connections you not only had to deal with to remove then engine, but the ones you didnt mess with... then look at the JB (fuses).. and then the ign switch.

pay particular attention to the connections/wiring under the neck covers
x2 - :rockon: -
 

·
Registered
Joined
·
112 Posts
Discussion Starter #4
Well I definitely panicked on this one just a blown fuse while hooking up my gauge cluster.
 
1 - 4 of 4 Posts
Top