[Nickdwhit]

Not sure if anyone has had this problem but my metal fuel outlet elbow that slides into the petcock on the front side will not stay in at all. I can push it back in but as soon as I give it a little gas it pops right on back out. Any suggestions? If I have to replace the petcock then so be it.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[NIBiker]

I had the same problem with both outlets, I think I posted a few months back querying about it, got sorted though, I cleaned the elbows and where they push into with wire wool then use some loctite ( oil and fuel resistant stuff) sorry I can't rember the number, but you should be able to google it, anyway I used a dollop of it in both elbows and pushed the in and gave them a few taps withe a wood block and hammer, make sure you have them pointing the right direction. Haven't had any bother since!

 

[Nickdwhit]

That figures! I just wasn't pushing it in all the way (go ahead make your jokes). Thank you very much. Saves me 90 dollars if it works ha

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[NIBiker]

That figures! I just wasn't pushing it in all the way (go ahead make your jokes). Thank you very much. Saves me 90 dollars if it works ha

Sent from my SAMSUNG-SM-G890A using Tapatalk

No problem, hope you get sorted😉