Kawasaki VN750 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
109 Posts
Discussion Starter #1
Looking for some suggestions for a small problem I'm having. Just changed out all 4 turn signal bulbs to led bulbs also replacing the factory flashing relay with a JL-02 (EP34) relay (see link below). With the new relay, the flash speed is normal and the back turn signals work just fine. The fronts however, illuminate but do not flash. If I install a halogen bulb into the front turn signals, it will rapidly flash when the turn signal is switched on.

3 Pin CF13 JL-02 EP34 Car Flasher Relay Fix LED Light Hyper Blink Flash No Flash | eBay

Any idea or suggestions on how to resolve this?
 

·
Registered
Joined
·
738 Posts
Are the LEDs dual (two contacts on the base) or single (one contact on the base) intensity? Front should be dual intensity.
 

·
Registered
Joined
·
109 Posts
Discussion Starter #3

·
Registered
Joined
·
109 Posts
Discussion Starter #5
1 - 5 of 5 Posts
Top