Kawasaki VN750 Forum banner
1 - 1 of 1 Posts

· Super Moderator
2003 VN750
Joined
·
11,016 Posts
1) slightly compress the caliper piston, a c-clamp is best but even a screwdriver will work, you just need to be careful

2) remove the caliper bolts

3) remove the caliper

4a) note the position of the clip in case it falls out, you'll know how to replace it

4b) slide the pad out of the caliper, it should pop out of the clips (you can pry the pad out but do not bend the clips or the pads won't fit)
 
1 - 1 of 1 Posts
Top