Kawasaki VN750 Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
Is the exhaust at a vn 700 85 model simular to the exhaust on the vn 750 94 model?
Are there many changes from the vn 700 85 mod and the 750 models that are made from 1986 an up to 2000?
 

·
Registered
Joined
·
273 Posts
I do believe that the exhaust components are the same.
:beerchug:
 

·
Premium Member
Joined
·
4,773 Posts
There have been a few changes over the years, like changing the master cylinder from rectangular to round and modifying the levers. Other than the smaller displacement cylinders and pistons on the VN700, pretty much everything else will interchange.
 

·
Registered
Joined
·
15 Posts
Discussion Starter #4
Is all parts easy to get to this bike, i live in norway and it is hard to get over her.
 

·
Premium Member
Joined
·
4,773 Posts
Used parts are readily available here on e-bay. But not all sellers are willing to ship overseas. New parts are available from cheapcycleparts.com, Kawasaki dealers, and elsewhere.
 

·
Linkmeister Supreme
Joined
·
7,960 Posts
Welcome to the Vulcan madness stormyinc.

We have a few members from Europe and the UK on this board, so maybe they can tell you sources for new parts over there. European ebay is probably a cheaper source for used parts, if you can find them.

Get a Clymer paperback service manual that many of us use, at this link or locally:
http://cgi.ebay.com/ebaymotors/Kawasaki-700-VN-750-Vulcan-Service-Manual-1985-2006_W0QQitemZ280597212337QQcategoryZ34238QQcmdZViewItem

Kawi downloadable service manual is available here:
http://www.tocmanufacturing.com/Files for Download/VN750 Manual and Parts.pdf

Exhaust system is interchangable on all model years of VN7XX motorcycles.

There are a few changes over the years, and in bikes sold in different areas of the world.

-Watch for lighting and corresponding wiring harness differences regionally.
-Self cancelling turn signals were on early models, `85 to ~`88.
-Rectangular MC from `85-`90 with bent lever.
-Round MC from `91-2006 with straight lever.

Follow the directions here on fergy`s spline lube link before riding too far:
http://pages.tstar.net/~fergy/writeups/final_drive1.html
 

·
Registered
Joined
·
15 Posts
Discussion Starter #8
I have been checking out bikebandit for engine part, things like ring set piston, cylinder engine... i these parts are not to get to my model on that page
 

·
The Professor
Joined
·
3,147 Posts
I have been checking out bikebandit for engine part, things like ring set piston, cylinder engine... i these parts are not to get to my model on that page
Piston rings are no longer available for the vn700 :doh:
 
1 - 11 of 11 Posts
Top