Kawasaki VN750 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
144 Posts
Discussion Starter #1
I know this sounds funny but I don't know if I'm looking at the right spot. I see a hose that comes to eah side of the head. And this connection bolts to the side of each head with 2 bolts. Is this where I want to take the hose off and install the marble. Also if I wanted to make a plate is it just a matter of taking a piece of metal and cutting it to fit or is their something speacil about it.:cool:
 

·
Registered
Joined
·
722 Posts
YOUR IN THE RITE SPOT!!!!I just made coasters for mine and used 1/4" Aluminium and bought shorter bolts and was able to re-use the gaskets.
 

·
Registered
Joined
·
144 Posts
Discussion Starter #3
YOUR IN THE RITE SPOT!!!!I just made coasters for mine and used 1/4" Aluminium and bought shorter bolts and was able to re-use the gaskets.
Did you remove the hoses or did ou cap them off.
 

·
Registered
Joined
·
722 Posts
I removed the hoses and the valve under the seat.
 
1 - 4 of 4 Posts
Top