Kawasaki VN750 Forum banner

1 - 20 of 33 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Hello all,
I have found the solution to the endless search for highway pegs for our bikes! These highway pegs are slim line and foldable, fully CNC machined, and made specifically for the VN 750! This pair is made of mild steel and stainless hardware. All future sets are to be made of stainless complete and the pegs are chrome plated. Installation is super simple (takes 10 minutes). Simply remove the old engine mount bolts on one side, bolt on your highway peg with the new bolts, and tighten down. When you move to the exhaust side, you do have to remove the pipe and foot control bracket to get to the bolts. These are for sale for $60 a set shipped, that includes the foot pegs, brackets, and all needed hardware. I have a 30 inch inseam and they give me the perfect amount of stretch for long hauls. Please feel free to email me for requesting a set or questions. Thanks for checking these out!
 

Attachments

·
HAWK
Joined
·
2,576 Posts
Cool, Looks kinda like the ones I have been making for years.
 

·
Registered
Joined
·
207 Posts
I really like Woodydh's brackets, they are simple and elegant.

If you don't have a machine shop at your disposal, I noticed that Harley FXR or Dyna-glide highway brackets are about the same as Ccspinner's and go for $30-$40 on Ebay. I just picked up a chrome set for $37 with shipping (see here). It looks like I will have to drill new holes to match the frame mounts on the VN750.
 

·
85 VN 700
Joined
·
1,033 Posts
I really like Woodydh's brackets, they are simple and elegant.

If you don't have a machine shop at your disposal, I noticed that Harley FXR or Dyna-glide highway brackets are about the same as Ccspinner's and go for $30-$40 on Ebay. I just picked up a chrome set for $37 with shipping (see here). It looks like I will have to drill new holes to match the frame mounts on the VN750.
Post pics when ya get em installed?

And CC ya might wanna remind us what you charge for yours. Nothing wrong with a little competition. Eventually I'll get around to hacking out my own. At this rate I can never sell the vulcan cause I'll have it too customized.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #5
custom pegs

Thank you. When they are folded up they sit about 1 inch wider than the airboxes, and just below for height. I have a pic if interested. I had them painted black to help blend in with the frame.
 

·
Growling at the World...
Joined
·
564 Posts
And CC ya might wanna remind us what you charge for yours. Nothing wrong with a little competition.
Chad's site for the foot pegs is at http://www.chadsbike.com/highway_mounts.htm. I've taken Chad's bike out for a ride and can say that the highway mounts he sells fit my 30" inseam perfectly. I also found his floorboards to be comfortable as well.

If I ever get another VN750, these are two mods that I must have...
 

·
Richmond, VA
Joined
·
26 Posts
I have a 29 inch inseam and am guessing that these will work for me. I would like to order a set. How do I proceed?

Rodd

[email protected]
 

·
Linkmeister Supreme
Joined
·
7,960 Posts
I have a 29 inch inseam and am guessing that these will work for me. I would like to order a set. How do I proceed?

Rodd

[email protected]
Not sure if you are refering to woodydh`s or Ccspinner`s bracket.

woodydh`s last post on the forum is just over 2 years ago, but you could click on his name, then click on "send email" to see if he resonds.

Ccspinner is still active on the board and will likely see this post. You could also send him a PM or email.

lance 328 also makes a bracket based on Ccspinners design.
http://www.vn750.com/forum/showthread.php?t=9987

Note the Kuryakyn offset peg in lances pics. It can rotate around to accomodate various length of inseam and height from the road.
 

·
Registered
Joined
·
1 Posts
Hello all,
I have found the solution to the endless search for highway pegs for our bikes! These highway pegs are slim line and foldable, fully CNC machined, and made specifically for the VN 750! This pair is made of mild steel and stainless hardware. All future sets are to be made of stainless complete and the pegs are chrome plated. Installation is super simple (takes 10 minutes). Simply remove the old engine mount bolts on one side, bolt on your highway peg with the new bolts, and tighten down. When you move to the exhaust side, you do have to remove the pipe and foot control bracket to get to the bolts. These are for sale for $60 a set shipped, that includes the foot pegs, brackets, and all needed hardware. I have a 30 inch inseam and they give me the perfect amount of stretch for long hauls. Please feel free to email me for requesting a set or questions. Thanks for checking these out!
I would like a set of those pegs for my kawaski vulcan 750 2004
 

·
FREEBIRDS MC CENTRAL NY
Joined
·
16,076 Posts
This is an old thread and he hasn't posted since 2008.Wolfie makes forward controls he might make highway pegs as well.since this is your first post why don't ya introduce yourself in the newbie section
 

·
2000 VN 750 Senior Member
Joined
·
2,494 Posts
Hi Im interested interested in buying some of these can you get me your phone #or call me at 740-808-653seven
How about a proper introduction under the Newbie Check-In heading plus letting us know which person you want to make contact with? I understand this is your first post but there is a proper way to reply and a proper way to do a short basic intro. Welcome any way.
 

·
1986 VN750
Joined
·
3,255 Posts
How about a proper introduction under the Newbie Check-In heading plus letting us know which person you want to make contact with? I understand this is your first post but there is a proper way to reply and a proper way to do a short basic intro. Welcome any way.
He was talking to the original poster, who said "Please feel free to email me for requesting a set or questions."

He may not be very technical, thus he replied with his info. Why do we have to literally bug every single new person into 'introducing themselves' the way a small few of you agreed upon? Let it happen naturally...
 

·
FREEBIRDS MC CENTRAL NY
Joined
·
16,076 Posts
Some people don't get it.
 

·
FREEBIRDS MC CENTRAL NY
Joined
·
16,076 Posts

·
2000 VN 750 Senior Member
Joined
·
2,494 Posts
He was talking to the original poster, who said "Please feel free to email me for requesting a set or questions."

He may not be very technical, thus he replied with his info. Why do we have to literally bug every single new person into 'introducing themselves' the way a small few of you agreed upon? Let it happen naturally...
Maybe you are right and so why do we have to have any sense of proper manners or such. We should just be able to say what ever we want in any manner we want. No civility. Bring on the chaos. I agree with you 100%. Manners are foolish and just get in the way. We do not need any common courtesy in anything any more. The world will probably be a better place your way. lol
 
1 - 20 of 33 Posts
Top