Kawasaki VN750 Forum banner

1 - 8 of 8 Posts

·
Linkmeister Supreme
Joined
·
7,960 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter #5
Go to the photo gallery in technical photos and on page 3 there is a drawing of the procedure. I marked the clutch hub with a permanent marker and drilled the holes myself with a hand drill. Precision is not a requirement for this simple job. The hardest part is getting the hub nut off and I show how to use a Craftsman strap wrench to hold the hub and remove the nut on page 1.
 

·
Linkmeister Supreme
Joined
·
7,960 Posts
Link to chillers pictures from post above: http://www.vn750.com/photopost/showphoto.php?photo=2891&cat=503

What am I missing here...WHAT worked great??
It is a process where holes are drilled into the clutch drum to let oil drain out more readily, I did a search but I could not find it.
Here is a picture/diagram from the gallery of the clutch basket and where to drill the holes:
http://www.vn750.com/photopost/showphoto.php?photo=247&cat=503
 

·
Registered
Joined
·
292 Posts
What size socket did you use for the cluch hub nut?
 
1 - 8 of 8 Posts
Top