Kawasaki VN750 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
293 Posts
Discussion Starter #1
My R/R gave up on me this past weekend and my stator is not performing like it should, so I'm going to learn how to replace a stator in the next couple of weeks. I ordered parts this morning that will hopefully be here sooner than later and I'm hopefully going to start to pull the old stator out to send to TPE to be rebuilt. Upon tearing into the bike to test the R/R and stator, i found the wires on the bike side of the bullet connectors from the stator were slightly melted, and the connector for the R/R has either caught some battery acid or melted or both. I want to replace the wiring from the stator to the R/R and also the connector. Couple questions, what gauge is that wire and can I get a replacement connector? Or can I get an OEM replacement for those wires with connector(s) already on it?

Thanks,
Shane
 

·
Premium Member
Joined
·
5,236 Posts
Contact slimvulcanrider,or do a search with keywords> RR connector < and see what you find.I saw a link posted for a placed that sold the connectors with the little clips that go inside your plug if it isn't ruined.I'll look too.
 
1 - 2 of 2 Posts
Top