Kawasaki VN750 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I gone replace my front break lines with russel steel braided lines. I need to find out what size banjo fitting I need. also if they are the same size though hole system. The one thinking of buying is russel 3/8″ (10mm) banjo bolts that connects to into AN3 brake lines. Is this right size?

I also need to replace throttle wires and clutch wire to shorter ones.
Since I have change the handlebars on the bike. I probably need about 6 inches shorter on both. Any suggestion to find anything like that?
Any help would be great full
 

·
Registered
Joined
·
66 Posts
I’ll let you know here in about a week, I’m actually upsizing my handlebars so I’ll need a new brake line. I think it’s 10mm and I’m gonna purchase one that I can return anyways if it doesn’t work out. As far as downsizing, you won’t need to get shorter cables, there will just be excess slack but nothing unmanageable.


Sent from my iPhone using Tapatalk
 
1 - 3 of 3 Posts
Top