Kawasaki VN750 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I bought my bike in october nearly inspection ready, it had a broken left blinker (front and back) but i put 2 wires together and it works.. The only problem is its in reverse. Instead of blinking on and off, they blink off and on, and stay on by default. Where should i look on the bile to fix this?
 

·
Premium Member
Joined
·
1,426 Posts
For the front signal there’s 3 wires, the black/yellow is common or ground, the blue is for the daytime running light circuit and the grey and green are for the turn signal (green for the left, grey for the right). Sounds like these could be crossed. The wiring for the rear signals is the same minus the blue wire since the rear do not have a daytime running circuit. So only two wires each for those. Verify this first, before you look at the relay.
 
1 - 2 of 2 Posts
Top