Kawasaki VN750 Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
So I picked up this semi-complete vn750 bobber project for $450. 16k miles. Clean Fl title too!

The guy works at a HD dealership and was riding it back and forth until he bought a slightly used HD bike. Tank was rusty inside so he did a flip cut to sand blast the inside.

When i first brought it to the shop:



Did some welding/brazing on the tank, epoxy primed it, filled it, sealed it, and then KBS tank sealed the inside.



The rear had been chopped and hard-tailed with bars for struts... not my style:



So I cut that mess out and added new tubes:



I tig welded up some exhaust, tubes aren't cut to length yet.





I've earshaved it, coastered it, 142 mains, 42 pilots, and all "non-essential" wiring was removed.

Seat is still not in it's final spot.... I made provisions to be able to adjust it. I've also made a custom battery box, and an under seat storage compartment. Trailer fender from TSC helped out a bunch.

yay!
 
1 - 1 of 1 Posts
Top