Kawasaki VN750 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. Engine
    Hi all, does anybody knows the service diameter of the gear spur were make contact with the one way clutch? Thanks a lot!
  2. Electrical
    So I bought a basket case and I'm trying to get it running. It started the clicking from the solenoid which j know could be the solenoid or possibly a bad starter. When I took the side cover off I found a few wires not connected to anything. See pic. Are they supposed to be connected...
  3. Electrical
    Had some trouble with my Vulcan today. I will try to paint the picture. Got a new battery last year. Have had it on the tender a couple of times this winter, but it had not been on one for a couple of weeks. Yesterday it started with the choke on. I rode about 20 minutes and parked it. Started...
  4. Engine, Exhaust & Cooling
    I am having an issue installing a new starter. Seems I can not get it past or over the outer o ring. Any suggestions? Deeply frustrated.....
  5. Electrical
    I haven't been able to ride my 95 vn750 lately so I haven't had time to wrench on the bike or even be active on the forum. My bike sat for like a month I bought a new AGM battery for it and a soliniod (mine went bad) installed them without a hitch. I put my key in the ignition all my lights lit...
  6. Engine, Exhaust & Cooling
    So this weekend I had to take the carbs off and fix the floats. Had trouble with flooding, and the floats wouldn't close. I was able to fix that and put the bike back together. Now she struggles to start hot or cold. It took me 10 mins or so of starting to get it running. But once its running...
  7. Electrical
    Hello, first off thank you to everyone who helps me solve this problem. I will describe the bike, then the issue and everything I know and have checked. The bike is a 94 and the previous owner had done electrical work on it to make it minimalistic. To start the bike one flips two switches and...
  8. Electrical
    So I pulled my starter to rebuild, the brush part didn't fit. Put it back together and all I got was rapid clicking from the relay (and a little smoke from the starter). I pulled the starter again and ground down the brush plate so it would fit. Got everything installed and the starter turns...
  9. Electrical
    So this is new. The bike starts right up beautifully when i first get on it. If I ride ten minutes and turn it off, it doesn't want top start again until I let it sit for about ten minutes. Then the starter weakly turns things over but very weakly it feels like. Once it sits then it's back...
  10. Engine, Exhaust & Cooling
    Okay so I am shopping for a new starter for my bike. I recently got it built (I got it as a box of parts and a frame) and I attempted to start it and it would roll over a few times (difficultly) and then stop like it had a dead battery. So I put a brand new battery in it and it is still doing...
  11. Electrical
    just replaced the stator on my 90 vn750, we go to hit the starter button and nothing happens, so we try to jump the starter and it cranks for ever but wont start. checked to see if it had spark,nothing, has fuel in both cylinders but no spark. both coils are hooked up as well. what other wires...
  12. Electrical
    So I let my buddy ride my bike while i was out of town as a thank you for helping me drive to go get it and all that. While I'm gone he had a seal pop out holding coolant and now also the bike wont turn over. I had been having issues starting the bike up once in a while thinking its just an old...
  13. Electrical
    I have been on a 15,000 mile trip around the country for the past few months, and I've just begun having some problems starting the bike. The engine cranks but won't turn over. I've been able to get it to start a few times by banging on the engine with a wrench under the seat, but today I just...
  14. Electrical
    I just got a new battery (YB14L-A2 12 volt ) in March, I usually ride a lot to work almost daily, Since having the new battery I've had to drain some fluid out to make the levels right two times. I don't know if the heat in Texas is causing the fluid inside to expand and go above the high mark...
1-14 of 14 Results
Top