Kawasaki VN750 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Electrical
    Okay. I just got the bike back. Running decent after coming from the shop. In fixed there screw ups. But my bike is still not charging..... I have replaced these things so far. R/R, stator (Its tux modded but I didn’t do it.),battery. I rode it all day and she ran till she Killed the battery...
  2. Electrical
    I got mine vn750 over half a year ago but was already experiencing problems with the battery back then. Hadn't really looked at it until today I decided to do some tests. I also did replace the battery since then but same result. Testing at the battery would only give ~12-12.3 dc even at 5k...
  3. Electrical
    I've replaced the stator and the R/R in my '95 Vulcan 750, and I'm still only reading battery voltage regardless of the engine speed. I've got a few ideas to try and was hoping to get your guys' feedback. 1. It's possible that the new stator is no good. I plan on checking the voltage between...
  4. Electrical
    Hi, I just recently purchased a 1993 Kawasaki Vulcan VN750. The Motorcycle starts and runs and I can drive it but when I turn it off and come back later to start it, There isn't enough juice in the battery. I did a voltage check with the engine running and it was around 12.4 then when I rev the...
  5. Electrical
    Fresh links: youtube: http://youtu.be/Dcw-RP3Tr48 OFF BIKE Stator Cover Mod: https://www.facebook.com/media/set/?set=a.518753964851158.1073741825.127574493969109&type=1&l=97324c288a facebook: http://www.facebook.com/pages/90-Kawasaki-Vulcan-Alternator-Stator-Regulator-Mod/127574493969109
  6. Electrical
    So I tested my R/R to find that was bad. After looking into my options I went with the Mosfet FH012AA upgrade discussed here. As per the instructions that came with the R/R and from http://www.roadstercycle.com/ I wired the 3 yellow wires from the stator directly to the 3 plugs on left of the...
  7. Electrical
    i am thinking of trying the cycle electric ce-602 r/r it is a non shunting type. does anyone have any thoughts or expierence on this.
1-7 of 7 Results