Kawasaki VN750 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Projects & Builds
    Hey all! As some may know, I bought a completely trashed Vulcan earlier this spring. The past few months have been crazy! I got married in August! Hence, I haven't had as much time to work on my bike as I'd like. My buddy and I got the bike to fire up for about 5 seconds by cranking it and...
  2. Electrical
    Firstly, I'll start by saying I have an 2004 800 classic (don't crucify me for being in the wrong forum. I just need help.) I did a rebuild on the bike. Right when I got it all together, it fired up. Got the idle right and everything. Went to take off for a shake down and I got two feet and the...
  3. Engine, Exhaust & Cooling
    If anyone has done an engine rebuild, do you know where I could get new oil filters for the cylinder heads? The small, solid mesh disc looking ones. It goes in under a spring in the near the cams. The manual says to replace them. I'm just trying to get ahead on things I need so I don't have to...
  4. Carbs & Fuel System
    Alright so the issue is that it's missing in one cylinder. But it is getting fire, it has good compression, I put all new plugs in it, and I even made sure the plug is firing correctly its a nice bright blue spark. So my only conclusion is that I'm not getting fuel to that cylinder. Whether it...
  5. Engine, Exhaust & Cooling
    So I was thinking about rebuilding my engine next year. I have a few things i want to do a few things while i have it all apart. Two things i really want to do is to have it bored out a bit, and i want to raise the compression ratio to somewhere around 11.5:1. i have a few other things i'm gonna...
  6. Engine, Exhaust & Cooling
    So I was starting to rebuild my engine when I noticed that they sent me the new style for the top compression ring, is it ok to use the newer ring on the old style piston. I included a picture form the manual. Thanks Ben
  7. VN750 General Discussion
    Hi guys, I have just been looking at maybe getting hold of a 700/750 engine so that I can have one in my bike and one striped and rebuilt ready, I live in the UK and I just cannot seem to find another 700/750cc to replace my 700cc, I have seen a couple of 800cc on ebay and I was wandering if...
  8. Engine, Exhaust & Cooling
    Hello all, this is my first post. So I started a winter project. I have an oil leak coming from the rear head, and a knocking in the front. So I have decided to redo the top end. Then I decided to repaint my bike. It is 2 different colors. So I have all the metal off now, and have almost...
  9. Carbs & Fuel System
    I was able to remove the carbureator this afternoon in order to attempt to clean/rebuild them. This is my first bike and I have NO experience whatsoever. Can someone get me a link or instructions on what I need to do? I saw that a carb rebuild can run $300, but would it run that high if I have...
  10. Engine, Exhaust & Cooling
    My dad has been riding bikes for a long time now. And out of the blue, my mom decided that she wanted to start riding. She started on a crappy little scooter to learn and then bought a 2002 Vulcan 750. But it turns out that a previous owner tried to bore out the cylinders. It rode, but it...
  11. Wheels, Suspension & Brakes
    my 96' with 9400 miles the front brakes are always grinding ... the calipers seem to be stuck, just like disc brakes do. how do i figure out if the brake fluids old and needs changed, the calipers need rebuilt, or what????? any help is greatly appreciated...
1-11 of 11 Results
Top