Kawasaki VN750 Forum banner

cams

  1. Timing is retarding while reving?

    Electrical
    I recently had to replace the cams in my bike, a 2005 vn750 and I got the thing running but when I took it out to ride it completely cuts out at 4000rpm. I thought I had the cams in wrong, but pulled the engine again and checked. They were off one tooth on one cam so I fixed it and when I...
  2. VN750 cam (camshaft) guide

    Engine / Exhaust / Cooling
    This is my first post here. :) I helped a friend with her newly purchased 2005 VN750 which had no compression in the rear cylinder (was running on the front cylinder only). Disassembly revealed that both intake rockers were completely displaced, one lobe of the intake cam was deeply gouged...
  3. Engine Knocking

    Engine / Exhaust / Cooling
    :doh:I had ran my 95' low on oil and it started to knock. Going down the road with the clutch in it wasnt so bad, but when on the throttle it sounds bad. The knock is inconsistant, and is coming from the rear cylinder. I have pulled the engine to get to the top of the heads. Now that it's out...
Top