Kawasaki VN750 Forum banner
broken
1-4 of 4 Results
  1. Electrical
    Hey all, I had a problem with my rubber rotting and signal drooping like so many others and came up with a good fix while the replacements from ebay are shipped. I used high pressure tubing from the hardware store split up the middle then zip tied and screwed into the housing on either side of...
  2. Engine / Exhaust / Cooling
    Thank you all for your replies. I was able to get the rod (pn 39110) in without splitting the case open with the help of my father in law " The great one " with removing clutch and stator and of course it being a 2 man job and A LOT of patience was able to remove the broken rod from a small hole...
  3. Engine / Exhaust / Cooling
    Just got my first bike (1996 Vulcan 750) and I love it. It needs some maintenance though, and so this weekend I started with an oil change. Read all the info in the Vulcan Verses, then set about doing it. Having been an auto mechanic for several years, I didn't think this would be a big deal...
  4. Engine / Exhaust / Cooling
    I finally got the engine out to do my balance damper replacement. When I went to pull the side cover off I saw a piece of what I thought was damper fall on the floor. Upon further inspection of the piece I realized it was a gear tooth after fighting back the desire to cry I took the cover the...
1-4 of 4 Results
Top