Does anyone know if they make a Accel coil for our bikes? If so do you have a link.
Also I am looking to replace the wires and boots and anyone have a link for this also?
yes, they do, a little research on their site will help figure out which one(s) will work for our application. however, it is not a direct fit, so it will be a custom installation.
they also sell wire kits, but unsure if they have one for our bike
You should consider buying NGK plug ends if you haven't already. They are
great looking and my directions are based on using them.
[email protected] or 1-800-328-9280
2 Part# 20306 – NGK Spark Plug Cap XD05F $3.30 a piece.
2 Part# 20789 - NGK Spark Plug Cap LD05FP $4.80 a piece.
******** All NGK caps are made for Stock 7 mm wire. *********
Note: Dennis Kirk sells 72” of 7 mm Wire. 60" is all you need for the VN750, you will have some to spare.
Make sure you use copper core wire and not carbon core. 7mm is stock size, you can use 8mm but is harder to install with little to no gain.
2- LD05FP and 2- XD05F are what NGK suggest to use on our VN750 bikes.
Found a set of Accel coils for the 750 on ebay once, Tanner bought them, really low price.
Still got them, as I think they're actually the wrong spec for our bike. Going to give them a shot on the second VN over the summer and report back.
I used a set of performance coils for a GM V8 on a Honda CB, but that bike had points instead of a CDI box. Not sure if there would be trouble matching a set to CDI or not.
|All times are GMT -4. The time now is 01:29 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.