I've lost a the bolt from the left-hand grip-frame (part # 32109-1131 on Ronyer's exploded diagram here):
Looked at it with a flashlight and the threads look stripped in there. This is my first metric bike--will chasing it with a tap do? And what size tap do I need (the bolt is part # 132A)?
Or is there some other easier way? And is there a good place to order the bolt online?
The bolt is an M7 metric, Ron Ayers sells it for $2.35 and probably $10.00 shipping. You can buy a stainless bolt that will look good at Ace Hardware, buy 4 and make them all look the same and no one will know. You can probably get all 4 at Ace for lesss than $5.00. You can chase the hole with a Tap, should be pretty easy to do.
I put saddlebag brackets on my bike and replaced these bolts with ones from Ace, they look great.
|All times are GMT -4. The time now is 11:11 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.