Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums

Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums (https://www.vn750.com/forum/)
-   Carbs and Fuel System (https://www.vn750.com/forum/22-carbs-fuel-system/)
-   -   Sending unit (https://www.vn750.com/forum/22-carbs-fuel-system/103587-sending-unit.html)

Chevy65 01-31-2019 08:36 PM

Sending unit
 
Have an idea. Iím missin my fuel sending unit So to get by for now I was gonna cut out a piece of thin metal as a cap and then make a gasket. Thought about using the sheet gasket to make one. Cork mabey? Any suggestions on the gasket material. ďPreferably something I can get for the local parts store. Iím open to suggestions on the whole project. :smiley_th

TonyO 02-01-2019 08:32 AM

I would avoid cork and go for the sheets of rubberized gasket material from the parts stores. Cork has grain making it harder to cut good clean edges.
Maybe someone on here has a dead sender you could scavenge the base plate from?

Chevy65 02-02-2019 07:57 AM

Got me some of that fiber gasket material, says for gas, cooling, and something else so I’m I caint remember right off hand. gonna give it a try. Might still try to find a dead sender. Idk yet


All times are GMT -4. The time now is 12:39 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome