|Topic Review (Newest First)|
|02-05-2009 10:11 AM|
|flitecontrol||The stuff I used said it was safe for all rims, but read the label before you buy. If I could find my stuff (too much junk!) I could tell you the brand!|
|02-05-2009 08:16 AM|
its a really slow leak. I've already tried looking for leaks via soapy water. I am starting to think it might be the stem as I could see how it might get bent or whatever to get the air chuck on to fill it up. I know I had to use one with a 45 on it because of the awkward angle required to reach the stem.
i'll try airing it down and replace the valve core maybe that will help. then I can look for that bead sealing stuff (its safe for motorcycle tires?)
|02-05-2009 02:45 AM|
Originally Posted by Mastertech View Post
|02-04-2009 09:06 PM|
|flitecontrol||If it's not the valve, there are products made specifically to seal bead leaks. Check with a tire store, auto parts store, etc.|
|02-04-2009 08:17 PM|
Originally Posted by ryn View Post
Are you sure the valve isent leaking, put some spit on it and look for bubbles, if so, thats an easy fix.
Sometimes tires leak around the rim, let it down and air it back up.
|02-04-2009 07:47 PM|
|ryn||Sorry to Hi-Jack, but I have a Slow Leak in my rear tire (If I don't check for a few weeks it gets down to 20 PSI (I'm not riding it cause its always broke, as am i, so it is frequently low.) I cannot find any source of the leak and was wondering what if anything I could stick in there to prevent the leak. Would this ride-on be suitable? Keep in mind it would be a fix until I NEED a tire change, which should be at least half a year or 6000 miles, these tires are pretty new.|
|02-04-2009 12:54 AM|
|stvnsn78||Thanks for the good advice, guys. I'll forget the fix-a-flat.|
|02-03-2009 07:53 PM|
Originally Posted by stvnsn78 View Post
They also have another option for airing up a tire with a pump built into a 5-6' long hose, that screws into a spark plug opening in one of your bikes cylinders. It uses the compression from the bike to operate the pump, which pumps fresh air into the tire, not combustion gasses. It will work with any bike with two or more cylinders. I remember using one similar on my uncles farm, 40+ years ago, in the pick-up truck and in just a few minutes it had pumped up the tire.
One guy I read, said he always carried at least 2 ways to patch a tire and 3 ways to air one up. That may be more redundancy than we need to always carry, but if you are riding far from home it may be wise to do.
You have lots of options now to choose from, to stay away from slime and fix-a-flat.
|02-03-2009 05:47 PM|
Don't use Fix-a-Flat in your bike tires unless it is a last resort-emergency type of situation.
Go to Wal-mart and buy one of those "Sticky string" tire plug kits, and a 12 volt mini air compressor.
And BEFORE you get a flat, go here and buy yourself some Ride-On sealant to put in the tire:
This stuff does not make a mess........ (almost makes the above Wal-mart items useless),....and is approved by most shops that Hate fix-a-flat or Slime tire sealers.
I know Goldwing riders that swear by Ride-On...and I and more do also.
AND...if you are needing new tires anyway...go with Rhinotire treated tire from these fine folks:
(watch their videos......)
|02-03-2009 04:34 PM|
There's a thread about this here:
Might want to jump in...
|This thread has more than 10 replies. Click here to review the whole thread.|