|Topic Review (Newest First)|
|07-02-2013 03:29 PM|
|06-29-2013 10:45 PM|
|HardRock||I roughed them out with a band saw and a 2" wide belt sander with a 36 grit belt. Then I finished shaping them with files. Drilled them on a Bridgeport and I will be using a HD router table with a carbide bit to put the radius on. After that it will be back to files for touch up and then hand polishing them.|
|06-28-2013 02:00 PM|
|gibbo||Very nicely done, machined or hand ?|
|06-27-2013 05:00 PM|
Originally Posted by HardRock View Post
|06-27-2013 04:50 PM|
So I was looking at the 900 seat that I am putting on and kept thinking that there was to much of a gap under the pillion portion of the seat.Attachment 8530
So I used some scrap wood at the shop and mocked these up.Attachment 8538
Not quite there but better.
After digging through the aluminium scraps at my Dad's house I found some 3/4" thick plate and turned it into this.Attachment 8546
They fill the space nicely, let my saddlebags hang better than before Attachment 8554
and will put the turn signals farther back so they won't interfear with the bags.
After I get the turn signals mounted I'll radius the edges a bit and polish them up.