|Topic Review (Newest First)|
|06-24-2016 02:28 PM|
There are two part numbers of Cobras, single sided and dual sided.
4163SC = single sided
4163TSSC = dual sided
|06-24-2016 02:24 PM|
|Green1||He was looking at the Cobra pipes on another bike (he showed me the picture). Those are what he wanted. I know the site only shows a generic picture as do most of the site out there. I will have to show him the other pictures. Are the V&H equal length? I would think they are. I am glad this question came up. Otherwise I would not have done the research. Now to search for feedback on Cobra pipes.|
|06-24-2016 01:57 PM|
The only single sided exhausts are Cobra and Mac. (and not all of them are, they make both types).
Vance and Hines look like this:
There is no CARB issue either. It's an uneducated seller.
Only 2015+ bikes are affected by the law they're worried about.
|06-24-2016 11:32 AM|
|Green1||A quick look on Google shows they pass under the swing arm. You are right they don't go through the frame. Now if I can get around the CARB issue.|
|06-24-2016 11:02 AM|
|Green1||I was pretty sure the pipes he was looking at both came out on the passenger side. I thought it looked crowded there due to the water reservoir but really didn't think about it a whole lot. He actually went to the V&H site itself. Everything was going great until he entered his zip code. Then he called customer support. I haven't tried another site. He was told they were not CARB certified and due to the new laws couldn't be shipped here. My daughter's fiance had the same problem with his 2016 Dodge when he tried to get a cold air induction kit from Summit. He had to get a friend in Reno get it for him and ship it here. I will check on them today since our order from BikeBandit for splitting his case is supposed to arrive today. Were the early bikes made with the CA EVAP system. I have marbled both our bikes and removed the charcoal canister.|
|06-24-2016 05:05 AM|
Just say it's for an older bike (86 is a good year) at the very worst case when you go to buy them.
I had no issues buying them off RevZilla myself.
Or get a set off an eBay seller.
|06-24-2016 01:11 AM|
|Green1||We just tried to buy a set for my son's bike and they won't sell to California. The smog crap is in the way. If the 06 is CA compliant, with all the fuel evap parts in place they will have to be gutted to get the exhaust through the frame.|
|06-23-2016 08:15 PM|
|catharsys||Can't do that at the moment as her stomachs have been removed for cleaning and rejetting|
|06-23-2016 01:45 PM|
|Thorn||Have you tried twisting the right handle while riding the 2006? I've noticed a speed increase when I do that on mine.|
|06-22-2016 11:56 PM|
|catharsys||Works for me!|
|This thread has more than 10 replies. Click here to review the whole thread.|