|Topic Review (Newest First)|
|02-19-2016 01:40 PM|
Originally Posted by Spockster View Post
|02-19-2016 08:44 AM|
I zip tied mine to the frame
Sent from my LGL34C using Tapatalk
|02-19-2016 08:13 AM|
Maybe a piece of foam behind the bolt head if the bracket flexes. Might be a problem if the bolt head taps against the JB when/if the assembly vibrates. The JB is evil when it's not happy.
I cut the bottom from an aluminum frying pan, as wide as the r/r, with two bends, then bolted with the two battery box bolts.
|02-19-2016 03:35 AM|
69 cents - R/R relocate mount
This metal strip is normally an electrical conduit holder. Fits square into the R/R heatsink keeping it from any wobble. Rounded bolt-head offsets R/R from touching the J/B. Bolts in firm for mounting beneath the cover.
This has yet to be tested for fit, pending cage insertion tomorrow, but from what i have seen in other posts here so far, i expect it to fit just fine ( it's stiff but can still adjusted with a little pliers-persuasion vertically ).