|Topic Review (Newest First)|
|02-18-2020 11:44 AM|
|DACataldo||Thank you - I needed this info as well.|
|02-18-2020 12:13 AM|
|Josh Griem||Awesome thank you guys so much I will have to get the rebuild then I was tinkering with it today to find in the move I am missing bolts now but I deep cleaned everything do hopefully after the rebuild I'll be solid|
|02-17-2020 09:25 AM|
I was getting new master cylinders with lever on ebay for $20, universal type, as long the banjo bolt for the brake line fits, and the bar size is right, they work.
Rebuild kits for the VN750 master are about $22, ebay.
|02-17-2020 09:01 AM|
|michiganteddybear||the way to determine interchange between the different model years of vn700/750's, is the shape of the unit. the early years were rectangular, later years round. they are all interchangable with each other, with the exception of the handle, if you have a round one, you need the round ones's handle, and if its rectangular, you need the handle from that one.|
|02-17-2020 08:28 AM|
Hi. In theory you could use any master cylinder made for a 7/8 bar motorcycle.
(Youíd have to buy the lever that goes with it too)
Otherwise look on eBay. I think the 92 MC is different than the newer models and thatís usually the problem. You can buy s newer one, and as mentioned youíll need the lever that goes with it.
|02-17-2020 12:38 AM|
Front Master Brake Cyl.
Does anyone know of cheap sites or places to get the complete front master brake cylinder for a 1992 VN750? I found original replacement and it was 380 too much. Or does anyone know how and cost of rebuilding the whole thing yourself