Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums - View Single Post - final drive gear seal
View Single Post
post #7 of (permalink) Old 03-06-2015, 04:27 PM
Senior Member
GloryRider's Avatar
Join Date: Nov 2013
Location: Atlanta, GA
Posts: 277
iTrader: (1)
Don't disassemble the gear, hub, and cover... those are precision parts that have to be precisely set up...

You should be able to get the oil seal out without disassembling the gear...

You can try soaking the assembly in the picture in heated oil (250 degrees) and then punch the seal and pry it out with an awl or something like that... Make sure you don't scratch or damage the sealing surface on the ring gear hub!

Atlanta, GA
Current Ride: 1995 Vulcan 88 (1500A9)
Purchased Dec. 2014
approx. 6,800 miles

Previous Bike: 2000 VN750 "Glory"
With homemade stator
Details on stator build here

"Four wheels move the body. Two wheels move the soul"

"You live more in 5 minutes on a bike like this going flat out than some people live in their lifetime." - Burt Munro
GloryRider is offline  
For the best viewing experience please update your browser to Google Chrome