Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums - View Single Post - Turn Signal Relocation
View Single Post
post #1 of (permalink) Old 01-20-2006, 07:44 AM Thread Starter
Vulcan Verses
 
Join Date: Jan 2006
Posts: 178
iTrader: (0)
 
Turn Signal Relocation

A VROC member asked me in my private e-mail how I did my rear TS relocation shown in my post #36662. Well, Vince , it was pretty simple. I removed the rear turn signal units from their original locations by removing the hold down bolts and disconnecting the electrical connections. The turn signal units have a knob (for lack of a better name) sticking out the bottom of them. I cut these off using my Dremel tool. I removed the tail light assembly, drilled a hole on the left and right sides of it to match the original hold down bolt size. I then used the original TS bolts to secure the TS units to the tail light unit. I had to splice the TS wires because the relocation left them a little too short. I hope this explains things
Vulcan Verses is offline  
 
 
For the best viewing experience please update your browser to Google Chrome