Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums - View Single Post - "Struts"
Thread: "Struts"
View Single Post
post #2 of (permalink) Old 06-27-2013, 05:00 PM
WilliamTech
..have a vulcan good day!
 
WilliamTech's Avatar
 
Join Date: May 2011
Location: Pensacola, FL.
Posts: 4,508
iTrader: (17)
   
Quote:
Originally Posted by HardRock View Post
So I was looking at the 900 seat that I am putting on and kept thinking that there was to much of a gap under the pillion portion of the seat.Attachment 8530
So I used some scrap wood at the shop and mocked these up.Attachment 8538
Not quite there but better.
After digging through the aluminium scraps at my Dad's house I found some 3/4" thick plate and turned it into this.Attachment 8546
They fill the space nicely, let my saddlebags hang better than before Attachment 8554
and will put the turn signals farther back so they won't interfear with the bags.
After I get the turn signals mounted I'll radius the edges a bit and polish them up.
Nice job!

'86 VN750 13,700 mi -Stock
-Purchased 2008 w/8800mi
Replaced ALL Cables . Kuryakyn LED Voltmeter
SilverStar Ultra 9003/HB2 H4 Headlamp, Jardine Fwd Controls,
Iridiums DPR7EIX-9 & Wires, Tuxedo Mod, Coil Mod, P/U Sensor Mod, Fork Seals,
Splines Lubed - 11/4/2012 - MF AGM Battery
Additional Flashing LED Brake Light on Trunk
Dampers went out @ 13+K !
After TOC MCCT's..... so amazingly quiet I discovered a rattling heat shield on my stock exhaust !
...have a vulcan good day!
WilliamTech is offline  
 
 
For the best viewing experience please update your browser to Google Chrome