Dyna pipes Installation - Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums
Engine / Exhaust / Cooling
\ From the radiator, through the case and out
the exhaust. If it has to do with the cooling,
engine or exhaust, discuss it here!

LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 02-05-2006, 10:44 PM Thread Starter
Join Date: Jan 2006
Posts: 22
iTrader: (0)
Dyna pipes Installation

I found the instructions to put on Dynas on this site and thought I would add a little to the excellent instructions...

I have been de-goated for a year, and I loved the stock pipes on my bike....the only reason I am swapping to Dynas is because my right pipe rusted on a hidden weld. When I took them off to de-goat, the weld was 1/2 way gone. I put some JB weld on it and rode it all last summer, but it finally broke all the way through.
If this didn't happen I personally would have left it alone. So to save $$ I found a brand new set of Dynas for 10$ on Ebay and here I am. Dyna pipes are a much higher quality pipe than our stock pipes (IMHO), Heavy guage steel, beautifully chromed and put together very well.
I just made a cardboard template for the muffler hangar needed to mount them and I am going to ask my Technology Department if they can make the parts for me as we have a kick ass set up at my school (I am a biology teacher).
If you would like a copy of the template I made (so you do not have to remove your pipes first) I would be happy to send it to you. Just E-mail me. [email protected] Also, in the instructions, it says to cut the flex pipe to fit it on the muffler.....I do not want to cut that weak stuff and have it rattle apart so I went to Advance Auto parts (national chain) and purchased a 1 7/8 inch ID pipe about 5 inches long ($2.00). It slips over the Dyna and over the flex tube, a little chicken**** for a gasket (high temp silicone or muffler bandage) and you are done! I put the pipes on today to see how it sounds...do yourself a favor and start her up with no mufflers on... she sounds really mean!
Anyway, the dynas look and sound great......but I still wish I had the old slash-cut pipes on there. But thats just my opinion.
Good luck!
PS- I have a used left hand stock pipe if anyone needs it.
weasel750 is offline  
Sponsored Links
post #2 of 2 (permalink) Old 02-12-2006, 04:46 PM
Join Date: Feb 2006
Posts: 12
iTrader: (0)
How much are you asking for the left side exhaust.
Thanks, Brian
brianjenwaldner is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Once registered, your User Name"cannot be changed". We can make exceptions within 7 days, but after that, it is set in stone.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome