2000 VN 750 Senior Member
Join Date: Sep 2010
Location: Central New Jersey
I had a right front foot peg break off and all I did was use a small screw driver to slip off the spring clip at the one end and then tap out the pin till I could grab it and pull it out the remainder of the way by the head with a channel lock or vise grip. Be sure to look at the placement of the spring so you set it up the exact same way for reinstallation. I took a picture with my phone just for a quick reference. The installation of the new peg is just as easy. Hold the new peg in place with the spring in the proper location and slide the pin back in. I used a needle nose plier to get the end clip back in place. It took less than five minutes from start to finish. Good luck.
and always remember, "Ride until you rot!"
**Really not sure if the Big "C" is back right now
but having to face the fact that this is a lifetime routine
going forward. Five operations done and it still continues.
New ride: 2009 Victory Vision Arlen Ness Signature Series