Vibration in turns - Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums
Wheels, Suspension and Brakes
Everything to do with wheels, tires,
suspension, forks and brakes

 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 05-04-2010, 12:01 AM Thread Starter
Members who have donated towards server costs
 
denny6006's Avatar
 
Join Date: Mar 2009
Location: InezKY pop.600
Posts: 5,236
iTrader: (9)
     
Garage
Unhappy Vibration in turns

I would like to explain whats going on with my bike and see if any one else has ever experienced this .
As I lean into a turn ,right or left,I get a small buzzing vibration all over the bike ,nothing major just annoying,It feels like a rough wheel bearing ,But up on the stand spinning the wheel s front or rear I cannot feel it,maybe it is because it is upright and not side loaded that I cannot feel any roughness in the bearings.
I have checked both tires for cupping and unusual wear and find no problem,the rear tire is worn some but not anything like worn out,I am sure the front is too but it isn't showing as much as the back one and they were installed as a set about 8000 miles ago, No problem in a straight line just a little aggravation in the turns,I suspect the back tire is feathered a little that I can't see or feel or a bearing that gives a little under a side load and is worn some I guess I need to start taking bearings out and check them one at a time for roughness and slack,It is possible they are oem since I have never changed them,Any body else got any thing I should check?I might add that the handling has not been adversely affected either.




If you see it on my bike I did it
VROC#30324
92 vn750(sold)
Current ride 05 1500 Classic FI
lovin' the new scoot



Quote:
"When all is said and done,usually more is said than done" UNK
Click on one x and drag to the other to read between them.

Psalm 40:1...
XI waited patiently for the Lord; and he turned unto me, and heard my cry. X
denny6006 is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 05-04-2010, 12:15 AM
MANIC MECHANIC
 
vulcanjoe's Avatar
 
Join Date: Feb 2006
Location: Dale City, VA
Posts: 942
iTrader: (0)
 
Send a message via MSN to vulcanjoe Send a message via Yahoo to vulcanjoe
my bike did this right after i got it i took a shot at the front wheel bearings first i got lucky and that was it.


34k so far
VN750.com member #613
Keep the shiny side up
coastered
de-goat and baffles removed
jetted 42-150 2 shims
Earshaved with unifilters
inside of tank coated
spline lube
long Beach Blue Pearl Paint 4/07
Shindengen FH012AA r/r
TPE stator
Exide sc30lfa Battery 28ah 445cca
Saddlemen saddlebags
2001 HD fatboy solo seat
Custom taillight & rear turn signals
Fergy's coil relay mod
Fiamm El-Grande high/low tone horns
vulcanjoe is offline  
post #3 of 6 (permalink) Old 05-04-2010, 12:24 AM Thread Starter
Members who have donated towards server costs
 
denny6006's Avatar
 
Join Date: Mar 2009
Location: InezKY pop.600
Posts: 5,236
iTrader: (9)
     
Garage
Quote:
Originally Posted by vulcanjoe View Post
my bike did this right after i got it i took a shot at the front wheel bearings first i got lucky and that was it.
I put them first on the list to check then, were yours worn or loose feelling or did you just replace them?




If you see it on my bike I did it
VROC#30324
92 vn750(sold)
Current ride 05 1500 Classic FI
lovin' the new scoot



Quote:
"When all is said and done,usually more is said than done" UNK
Click on one x and drag to the other to read between them.

Psalm 40:1...
XI waited patiently for the Lord; and he turned unto me, and heard my cry. X
denny6006 is offline  
 
post #4 of 6 (permalink) Old 05-04-2010, 01:18 AM
The Professor
 
lance328's Avatar
 
Join Date: Feb 2008
Location: BUFORD, GEORGIA
Posts: 3,147
iTrader: (15)
   
Check wheel bearings, stering stem spanner nuts and upper tree bolt.


85 VN700 "Old Yella"

REBUILT ENGINE
CUSTOM PAINT
VANCE & HINES CRUZERS
EAR SHAVED AND RE-JETTED W/K&N'S
DUNLOP ELITE K591 FRONT & REAR
VOLTMETER
SYNTHETIC BRAKE FLUID
SYNTHETIC OIL & GEAR LUBE
PLEXISTAR 2 WINDSHIELD
SPLINES LUBED
ACCT'S GREASED W/TOC SPRINGS
COASTERD
LEATHER SADDLE BAGS
LEATHER TOOL AND ROLL BAG
PICKUP COILS GAPPED AT .018"
NGK CAP, WIRES, IRIDUMS
BARNETT FRICTION PLATES & SPRINGS
CUSTOM GRIPS, MIRRORS, LEVERS
ORIGINAL STATOR & R/R 14.5v
DEKA MF AGM ETX15L

Best Auto/Moto Insurance | Motorcycle Protection Today | FREE Trade-In Quote
lance328 is offline  
post #5 of 6 (permalink) Old 05-04-2010, 01:56 AM Thread Starter
Members who have donated towards server costs
 
denny6006's Avatar
 
Join Date: Mar 2009
Location: InezKY pop.600
Posts: 5,236
iTrader: (9)
     
Garage
Quote:
Originally Posted by lance328 View Post
Check wheel bearings, stering stem spanner nuts and upper tree bolt.
Thanks




If you see it on my bike I did it
VROC#30324
92 vn750(sold)
Current ride 05 1500 Classic FI
lovin' the new scoot



Quote:
"When all is said and done,usually more is said than done" UNK
Click on one x and drag to the other to read between them.

Psalm 40:1...
XI waited patiently for the Lord; and he turned unto me, and heard my cry. X
denny6006 is offline  
post #6 of 6 (permalink) Old 05-04-2010, 08:19 AM
MANIC MECHANIC
 
vulcanjoe's Avatar
 
Join Date: Feb 2006
Location: Dale City, VA
Posts: 942
iTrader: (0)
 
Send a message via MSN to vulcanjoe Send a message via Yahoo to vulcanjoe
mine felt good on the bike but when i took the wheel off there was a little side to side play


34k so far
VN750.com member #613
Keep the shiny side up
coastered
de-goat and baffles removed
jetted 42-150 2 shims
Earshaved with unifilters
inside of tank coated
spline lube
long Beach Blue Pearl Paint 4/07
Shindengen FH012AA r/r
TPE stator
Exide sc30lfa Battery 28ah 445cca
Saddlemen saddlebags
2001 HD fatboy solo seat
Custom taillight & rear turn signals
Fergy's coil relay mod
Fiamm El-Grande high/low tone horns
vulcanjoe is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Once registered, your User Name"cannot be changed". We can make exceptions within 7 days, but after that, it is set in stone.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome