Members who have donated towards server costs
Join Date: Apr 2018
Location: southern, western, middle Tennessee backwoods
Originally Posted by TheJabberWoggy
I did something very similar to that, but instead of cutting straight up, i cut forward towards the oblong holes where the air filter tubes went. I cut just a little bit in the upper front corners and the whole thing slid out the back. I think i made some parts more complicated than they needed to be, but it worked out in the end without damaging anything (except the surge tank)
Since the oblong hole collapses, it squished around the top of the front cylinder and i was able to pull the whole thing out in one piece without having to move a bunch of wires.
"I need yo clothes, yo boots and yo motocycle."- Uncle Bob