Alternate location for rectifier
Thought I would throw this out there for those of you that are looking to relocate your rectifier. Having my engine out, I thought this would be a good time to do this. I decided to move mine to the inside surface of the L. side cover. I don't have any pictures but I'm sure you can picture it. Theres plenty of room and it keeps it out of sight and the weather. I used two 1 1/4" S.S. bolts along with two S.S.nuts, lock washers and two S.S. flat washers for the outside surface of the case. I used two round, 1/4" thick nylon bushings as spacers between the back of the rectifier and inside surface of the cover. Just use a little caution when drilling the 2 holes in the side cover. Theres plenty of clearance at the top and bottom of the 750 emblem. Although I don't think it was necessary, I ran a ground wire from one of the mounting bolts to the frame.