X3 connect the two kickstand wires together at the switch to bypass the switch.
The yellow wire on the 10 pin only triggers the headlight solenoid. It has no effect on the engine.
X - 1... i think . . . maybe...
when i took off my kickstand switch, i took it off as it poked out of the harness and removed the whole switch gizmo from the stand. Then i checked the switch itself, and... it's normally open. meaning...
when the kickstand is down, it's pressing the button in. That closes the switch and the bike won't run.
when the kickstand is up, the switch is spring pushed back out, that's normally open, i.e. its natural state.
So when i pulled it off the harness, side, i taped the two wires around each of them with some electrical tape, then taped the two already taped ends onto the harness with a little more to basically hide them.
I stand corrected if i'm wrong about this, but, please let me put my kickstand down before you push on me to lean me since i am standing corrected and stuff.