No problem. Get a 12V 30A relay and a 30A fuse holder with 30A fuse. I had the seat, tank, left airbox, and plastic cover(coil cover) above airbox off. Wire a power wire with fuse and ground wire from the battery to the front of bike. I mounted the relayin front of the coil pack. Hook the battery power wire, spliced with another power wire running to the fan connector, to relay terminal 85. Hook ground wire from battery to relay terminal 30. Run ground wire from fan connector to relay pin 87. Then run wire from switch on bottom of radiator to relay terminal 86. The battery wire will power both the relay and the fan. Once the radiator switch gets hot, it will ground out the relay which will ground out the fan. To confirm work is right, ground out the rad switch and the fan should click on. Also ride bike hot and confirm the switch on rad works. The fan will turn itself on and off.