Here's the Deal.... - Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums
Sell or Swap
Got a part you want to sell or looking for a part?
Want to trade for something? Post it in here!

 1Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 16 (permalink) Old 04-16-2016, 12:51 PM Thread Starter
..have a vulcan good day!
 
WilliamTech's Avatar
 
Join Date: May 2011
Location: Pensacola, FL.
Posts: 4,508
iTrader: (17)
   
Cool Here's the Deal....

Here’s the Deal…
I have my old 750 engine which lost Oil Pressure (14 K miles) no knocks/noise/grinding what-so-ever.…I’ve changed the oil/filter…still no pressure. Pulled oil sensor….still nothing.
I obtained another engine, installed it in my bike, but still need to get it on the road.
Talked to a bike mechanic, he researched and verified an engine casing split to repair oil pump…
@ $60.00/hr x 8 hours, plus parts. He made a quick phone call, is able to get a running 750 engine for $450.00
(not that I am interested). ENOUGH SAID !....…I am parting my old engine out.
All is up for grabs except carb’s, (But I still need to remove/transfer Tuxedo Mod and TOC mcct's onto my replacement engine mounted in bike).
Also have an extra (complete) stock exhaust which I will dig out of storage.

....Will get pic's up soon

BRO……..Not looking to make a killing, but do not desire giving it away.

86 VN750 13,700 mi -Stock
-Purchased 2008 w/8800mi
Replaced ALL Cables . Kuryakyn LED Voltmeter
SilverStar Ultra 9003/HB2 H4 Headlamp, Jardine Fwd Controls,
Iridiums DPR7EIX-9 & Wires, Tuxedo Mod, Coil Mod, P/U Sensor Mod, Fork Seals,
Splines Lubed - 11/4/2012 - MF AGM Battery
Additional Flashing LED Brake Light on Trunk
Dampers went out @ 13+K !
After TOC MCCT's..... so amazingly quiet I discovered a rattling heat shield on my stock exhaust !
...have a Vulcan good day!

'86 VN750 13,700 mi -Stock
-Purchased 2008 w/8800mi
Replaced ALL Cables . Kuryakyn LED Voltmeter
SilverStar Ultra 9003/HB2 H4 Headlamp, Jardine Fwd Controls,
Iridiums DPR7EIX-9 & Wires, Tuxedo Mod, Coil Mod, P/U Sensor Mod, Fork Seals,
Splines Lubed - 11/4/2012 - MF AGM Battery
Additional Flashing LED Brake Light on Trunk
Dampers went out @ 13+K !
After TOC MCCT's..... so amazingly quiet I discovered a rattling heat shield on my stock exhaust !
...have a vulcan good day!

Last edited by WilliamTech; 04-16-2016 at 01:14 PM.
WilliamTech is offline  
Sponsored Links
Advertisement
 
post #2 of 16 (permalink) Old 04-16-2016, 03:56 PM
Super Moderator
 
Join Date: Feb 2013
Location: SW Florida
Posts: 2,528
iTrader: (5)
 
kinda looking for, but not in any hurry to get it:'

complete clutch assy (disks, frictions, pressure plate, basket and the outer housing (which holds it all)..

by outer housing, not the clutch side cover or case parts, the part the steels key into (frictions key onto the basket).

lemme know if you can pull it, and if so, what your looking for shipped to 33947.

2005 VN750

Sold 11-27-17
michiganteddybear is online now  
post #3 of 16 (permalink) Old 04-16-2016, 04:53 PM Thread Starter
..have a vulcan good day!
 
WilliamTech's Avatar
 
Join Date: May 2011
Location: Pensacola, FL.
Posts: 4,508
iTrader: (17)
   
Quote:
Originally Posted by michiganteddybear View Post
kinda looking for, but not in any hurry to get it:'

complete clutch assy (disks, frictions, pressure plate, basket and the outer housing (which holds it all)..

by outer housing, not the clutch side cover or case parts, the part the steels key into (frictions key onto the basket).

lemme know if you can pull it, and if so, what your looking for shipped to 33947.
Can-Do
BRO..... check Ebay - make me an offer....

'86 VN750 13,700 mi -Stock
-Purchased 2008 w/8800mi
Replaced ALL Cables . Kuryakyn LED Voltmeter
SilverStar Ultra 9003/HB2 H4 Headlamp, Jardine Fwd Controls,
Iridiums DPR7EIX-9 & Wires, Tuxedo Mod, Coil Mod, P/U Sensor Mod, Fork Seals,
Splines Lubed - 11/4/2012 - MF AGM Battery
Additional Flashing LED Brake Light on Trunk
Dampers went out @ 13+K !
After TOC MCCT's..... so amazingly quiet I discovered a rattling heat shield on my stock exhaust !
...have a vulcan good day!
WilliamTech is offline  
 
post #4 of 16 (permalink) Old 04-16-2016, 05:22 PM
Senior Member
 
RoadHopper's Avatar
 
Join Date: Oct 2015
Location: Los Angeles - Central
Posts: 570
iTrader: (0)
 
Garage
Quote:
Originally Posted by WilliamTech View Post
Can-Do
BRO..... check Ebay - make me an offer....
Hey William!

I don't have Ebay and would probably F it up if i did, wouldn't trust the deal, would probably find out it was worth not trusting, and the part would probably get lost on the journey anyway...

But, pretty sure you know i still need to drop the engine to replace my stator. I'm interested in the following parts, and would cover the shipping, but can't until next month rolls in ( two weeks ):

Stator: Dead, cooked, weak, or healthy, matters little to me.
And the left side fly wheel cover and its outer stator cover.

With those, i could build the tux mod while the existing parts stay on my bike and have everything ready for when the engine drops.

Let me know, please. Thanks.
RoadHopper is offline  
post #5 of 16 (permalink) Old 04-16-2016, 11:22 PM
Senior Member
 
RoadHopper's Avatar
 
Join Date: Oct 2015
Location: Los Angeles - Central
Posts: 570
iTrader: (0)
 
Garage
Blatant bump to obviously wake William up.
RoadHopper is offline  
post #6 of 16 (permalink) Old 04-16-2016, 11:29 PM Thread Starter
..have a vulcan good day!
 
WilliamTech's Avatar
 
Join Date: May 2011
Location: Pensacola, FL.
Posts: 4,508
iTrader: (17)
   
Quote:
Originally Posted by RoadHopper View Post
Hey William!

I don't have Ebay and would probably F it up if i did, wouldn't trust the deal, would probably find out it was worth not trusting, and the part would probably get lost on the journey anyway...

But, pretty sure you know i still need to drop the engine to replace my stator. I'm interested in the following parts, and would cover the shipping, but can't until next month rolls in ( two weeks ):

Stator: Dead, cooked, weak, or healthy, matters little to me.
And the left side fly wheel cover and its outer stator cover.

With those, i could build the tux mod while the existing parts stay on my bike and have everything ready for when the engine drops.

Let me know, please. Thanks.
That would be my Tuxedo Modified cover.... Sorry

{All is up for grabs except carb’s, (But I still need to remove/transfer Tuxedo Mod and TOC mcct's onto my replacement engine mounted in bike).}

'86 VN750 13,700 mi -Stock
-Purchased 2008 w/8800mi
Replaced ALL Cables . Kuryakyn LED Voltmeter
SilverStar Ultra 9003/HB2 H4 Headlamp, Jardine Fwd Controls,
Iridiums DPR7EIX-9 & Wires, Tuxedo Mod, Coil Mod, P/U Sensor Mod, Fork Seals,
Splines Lubed - 11/4/2012 - MF AGM Battery
Additional Flashing LED Brake Light on Trunk
Dampers went out @ 13+K !
After TOC MCCT's..... so amazingly quiet I discovered a rattling heat shield on my stock exhaust !
...have a vulcan good day!

Last edited by WilliamTech; 04-17-2016 at 12:47 AM.
WilliamTech is offline  
post #7 of 16 (permalink) Old 04-17-2016, 03:43 AM
Senior Member
 
RoadHopper's Avatar
 
Join Date: Oct 2015
Location: Los Angeles - Central
Posts: 570
iTrader: (0)
 
Garage
Quote:
Originally Posted by WilliamTech View Post
That would be my Tuxedo Modified cover.... Sorry

{All is up for grabs except carb’s, (But I still need to remove/transfer Tuxedo Mod and TOC mcct's onto my replacement engine mounted in bike).}
But you putting that on the new bike, right, so what you doing with the old one on the new one. ( did i say that right, or do i need to start drinking again? )



Like i said, i wont be able to handle it for two more weeks anyhoos. That should give you some time, and a round tuit to swap out the stator soon.
RoadHopper is offline  
post #8 of 16 (permalink) Old 04-17-2016, 04:22 AM
Senior Member
 
RoadHopper's Avatar
 
Join Date: Oct 2015
Location: Los Angeles - Central
Posts: 570
iTrader: (0)
 
Garage
Quote:
Originally Posted by WilliamTech View Post
Here’s the Deal…
Also have an extra (complete) stock exhaust which I will dig out of storage.


86 VN750 13,700 mi -Stock
-Purchased 2008 w/8800mi
Replaced ALL Cables . Kuryakyn LED Voltmeter
SilverStar Ultra 9003/HB2 H4 Headlamp, Jardine Fwd Controls,
Iridiums DPR7EIX-9 & Wires, Tuxedo Mod, Coil Mod, P/U Sensor Mod, Fork Seals,
Splines Lubed - 11/4/2012 - MF AGM Battery
Additional Flashing LED Brake Light on Trunk
Dampers went out @ 13+K !
After TOC MCCT's..... so amazingly quiet I discovered a rattling heat shield on my stock exhaust !
...have a Vulcan good day!

Oh... and dibs on the left side heat shield. . . unless you will only sell the whole thing as a set.

mine is trashed... ( same side the previous owner(s) wrecked the bike on )
RoadHopper is offline  
post #9 of 16 (permalink) Old 04-17-2016, 11:02 AM Thread Starter
..have a vulcan good day!
 
WilliamTech's Avatar
 
Join Date: May 2011
Location: Pensacola, FL.
Posts: 4,508
iTrader: (17)
   
Quote:
Originally Posted by RoadHopper View Post
Oh... and dibs on the left side heat shield. . . unless you will only sell the whole thing as a set.

mine is trashed... ( same side the previous owner(s) wrecked the bike on )
Let me get out of storage...check it out.
My thought was to sell the whole system. - -

'86 VN750 13,700 mi -Stock
-Purchased 2008 w/8800mi
Replaced ALL Cables . Kuryakyn LED Voltmeter
SilverStar Ultra 9003/HB2 H4 Headlamp, Jardine Fwd Controls,
Iridiums DPR7EIX-9 & Wires, Tuxedo Mod, Coil Mod, P/U Sensor Mod, Fork Seals,
Splines Lubed - 11/4/2012 - MF AGM Battery
Additional Flashing LED Brake Light on Trunk
Dampers went out @ 13+K !
After TOC MCCT's..... so amazingly quiet I discovered a rattling heat shield on my stock exhaust !
...have a vulcan good day!
WilliamTech is offline  
post #10 of 16 (permalink) Old 04-17-2016, 11:21 AM
Senior Member
 
RoadHopper's Avatar
 
Join Date: Oct 2015
Location: Los Angeles - Central
Posts: 570
iTrader: (0)
 
Garage
Quote:
Originally Posted by WilliamTech View Post
Let me get out of storage...check it out.
My thought was to sell the whole system. - -
Well, this is poker and this is your deal, and we playin dealer's choice and ima just sitting here with plenty of time doing about 6 other projects all at once, so... you know... back-burner accordingly.

Just wanted dibs so you can adjust your salesmanship accordingly if someone jumps up and wants the whole thing. Hell, you think i'd blame you? But ifn on the other hand... by the time they get here and we come to terms, i should have at least 3 of those other projects done so they'd be arriving right on time.

RoadHopper is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Once registered, your User Name"cannot be changed". We can make exceptions within 7 days, but after that, it is set in stone.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome