F/S Tuxedo Style Stator Mod Kit - Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums
Sell or Swap
Got a part you want to sell or looking for a part?
Want to trade for something? Post it in here!

 4Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 381 (permalink) Old 10-28-2011, 11:11 PM Thread Starter
Member
 
Join Date: Apr 2011
Posts: 53
iTrader: (2)
 
F/S Tuxedo Style Stator Mod Kit

Well we all know it is not an easy task to renew the stator on the VN750 when it finally burns out..... the question is it really gonna burn out? More like when is it is more realistic.... Several ways you can renew it...drop the engine, lean the engine and so on...but really no easy way and have the chance of breaking something because a few bolts have to be removed..then have to deal with coolant and burping and so on if the engine is dropped out....... Their is a company that makes a really nice stator mount kit, but you still have to remove the left stator mount case, have them machine it, and buy their very nice custom stator mount....but it runs $400.00 plus shipping! Member TuxedoSeven came up with his mod and it works with great success! I have done the mod myself and works great........ It takes a little time to do the mod, but will make future stator changes a snap!..... This mod is not for the faint of heart and requires a little bit of skill to perform..... TuxedoSeven or I are not responsible if you decide to try this MOD and damage your motorcycle in anyway.....Also read the threads and info about this mod carefully as other tools and parts are needed that is not included in this kit to perform the mod..
.. between the thread here from TuxedoSeven and my picture website it should cover alot of questions and how to's...
....Also TuxedoSeven is the inventor and owner of this mod..... He has also applied and paid for patent...... he was nice enough to let me make and offer these kits to member's here until he say's otherwise

Tuxedo Style Stator Mod Kit is $25.00 shipped USPS Priority with tracking.***UPDATED PRICE DROP,knocked off $40.00 bucks total!*****
Paypal or Postal Money Order is fine...will ship upon cleared payment...... Links on the Tuxedo Stator Mod and the link to my picture website with various pics and descriptions of the mod are in my sig.

I make these kits up myself and have 2 kits already made up and ready to ship... reply here or PM me and will add you to list....thanks!

1.SOLD.........! FliteControl
2.PENDING.....MaDeInSin

In que for me to make a kit....

1. TTANNER

$25.00 shipped USPS Priority with tracking


Rags

P R Customz

http://imageevent.com/radicalrags/prcustomz

TuxedoSeven's Stator Mod https://www.vn750.com/forum/showthrea...t=16839&page=5

Tuxedo style Stator mount plate kits for sale.
$50.00 shipped! PM me and look at link below.
http://imageevent.com/radicalrags/ka...eplacement?n=0

Last edited by Rags; 11-26-2011 at 03:37 AM.
Rags is offline  
Sponsored Links
Advertisement
 
post #2 of 381 (permalink) Old 10-29-2011, 06:28 AM
Banned
 
Join Date: Mar 2009
Location: Cedar Grove, NC
Posts: 431
iTrader: (0)
 
Quote:
Originally Posted by Rags View Post
....Also TuxedoSeven is the inventor and owner of this mod..... He has also applied and paid for patent......
Seems a little overkill.... Is he selling something, too?
km60155 is offline  
post #3 of 381 (permalink) Old 10-29-2011, 07:00 PM Thread Starter
Member
 
Join Date: Apr 2011
Posts: 53
iTrader: (2)
 
Tuxedo is the one whom invented the mod....... He gave me permission to make the parts for the mod myself and offer them to members here for sale....I am making these kits until he decides he wants to make them..... He owns the patent on this Mod and kit style.... Another manufacture also sells a kit with the same concept, but it is $400 plus shipping and you still have to pull the engine and send them the stator case to have the same area cut out....... The whole reason behind the Tuxedo mod is not to pull the engine to replace the stator..... It makes sense if someone does not have the room or stuff to pull the engine out and cant make a big mess.....The hardest part of the Tuxedo mod in my opinion is making the plate and locating and drilling the holes exact.... The plate I offer is already drilled exact, test fitted and includes the mounting hardware...Helps and saves time for someone whom does not have the means to make the plate and wants to do this mod...This is just another way to change the stator on these bikes and make future stator replacements a breeze as it seems stator failure is high on these bikes from what I have read......

Rags

P R Customz

http://imageevent.com/radicalrags/prcustomz

TuxedoSeven's Stator Mod https://www.vn750.com/forum/showthrea...t=16839&page=5

Tuxedo style Stator mount plate kits for sale.
$50.00 shipped! PM me and look at link below.
http://imageevent.com/radicalrags/ka...eplacement?n=0
Rags is offline  
 
post #4 of 381 (permalink) Old 10-31-2011, 01:12 AM Thread Starter
Member
 
Join Date: Apr 2011
Posts: 53
iTrader: (2)
 
Thanks Tuxedo ................ I came up with a price I thought was fair..... I know the $400.00 plus kit that is offered is really nice, but this kit being 1/6 the price for the same end result and don't have to pull the engine is a plus....... The same place does offer just the stator mount if you cut your own case like the Tuxedo kit and it is $300 bucks plus shipping:/ !

Rags

P R Customz

http://imageevent.com/radicalrags/prcustomz

TuxedoSeven's Stator Mod https://www.vn750.com/forum/showthrea...t=16839&page=5

Tuxedo style Stator mount plate kits for sale.
$50.00 shipped! PM me and look at link below.
http://imageevent.com/radicalrags/ka...eplacement?n=0
Rags is offline  
post #5 of 381 (permalink) Old 11-03-2011, 08:34 PM Thread Starter
Member
 
Join Date: Apr 2011
Posts: 53
iTrader: (2)
 
I had no idea how to price these so tossed out a number.... I am going to go ahead and lower the price......... How does $50.00 shipped sound? Fair? Also would the metal scribe compass be included in the kit make it more appealing? $60.00 bucks for the kit shipped including the metal scribe compass for people whom don't have a Harbor Freight near by? I am just trin to get a feel on where this kit should be priced and what included

Also here is the same cheap rotary tool I bought many years ago and have used the hec out of it..mine is made by Buffalo and i paid 20 bucks for it..... I bet I have a good 40 hours use out of it so far and works good...... I used it to cut the case along with a Dremal arbor and Dremal thin cut off wheels.......

http://www.ebay.com/itm/40pc-Rotary-...item2c606d5dc5

Rags

P R Customz

http://imageevent.com/radicalrags/prcustomz

TuxedoSeven's Stator Mod https://www.vn750.com/forum/showthrea...t=16839&page=5

Tuxedo style Stator mount plate kits for sale.
$50.00 shipped! PM me and look at link below.
http://imageevent.com/radicalrags/ka...eplacement?n=0

Last edited by Rags; 11-03-2011 at 08:48 PM.
Rags is offline  
post #6 of 381 (permalink) Old 11-09-2011, 09:53 PM
1986 VN750
 
thtanner's Avatar
 
Join Date: Nov 2011
Location: Dana Point, CA
Posts: 3,255
iTrader: (8)
 
Garage
Good news. The previous owner of my bike did a custom job of one of these and the stock gasket did not fit in the end, so he used the liquid gasket (think hondabond) and there is a small leak.

Would the stock gaskets fit with your modification? I'm tempted to re-do all of his work properly just to eliminate the tiny leak, but if I could go this route I will.

1986 Kawasaki Vulcan 750
NGK Iridium Plugs #7803/DPR7EIX-9
Duralast Gold ETX15 AGM Battery
Coastered & Shaved
TOC MCCTs
Metzeler ME880 [110/90-19, 170/80-15]
Balance Dampers Replaced
Tuxedo Mod
Rebuilt Forks w/ Progressive Springs
V&H Cruzers
VN750.com Grill Cover
Meanstreak Seat
Emgo 23-92411 Handlebars
MOSFET FH012AA R/R


1990 Kawasaki Vulcan 750

1998 Honda VFR800 FI

2014 Honda VFR800F

1989 Pontiac Firebird Formula 350
thtanner is offline  
post #7 of 381 (permalink) Old 11-10-2011, 05:08 PM
1986 VN750
 
thtanner's Avatar
 
Join Date: Nov 2011
Location: Dana Point, CA
Posts: 3,255
iTrader: (8)
 
Garage
Quote:
Originally Posted by TuxedoSeven View Post
I believe some are grinding down the bosses for a snugger fit. I don't recommend this because it makes it a little too snug inside the outer cover and sometimes pinches a pickup wire. Others are going with a double gasket.
I would just take the cover off and apply fresh sealer. If you do, please follow the directions which will call for clean surfaces and curing time.
Super helpful response; thanks TS.

1986 Kawasaki Vulcan 750
NGK Iridium Plugs #7803/DPR7EIX-9
Duralast Gold ETX15 AGM Battery
Coastered & Shaved
TOC MCCTs
Metzeler ME880 [110/90-19, 170/80-15]
Balance Dampers Replaced
Tuxedo Mod
Rebuilt Forks w/ Progressive Springs
V&H Cruzers
VN750.com Grill Cover
Meanstreak Seat
Emgo 23-92411 Handlebars
MOSFET FH012AA R/R


1990 Kawasaki Vulcan 750

1998 Honda VFR800 FI

2014 Honda VFR800F

1989 Pontiac Firebird Formula 350
thtanner is offline  
post #8 of 381 (permalink) Old 11-18-2011, 01:52 AM Thread Starter
Member
 
Join Date: Apr 2011
Posts: 53
iTrader: (2)
 
On the 94 VN750 when I did the mod was super glue a used outer cover o-ring to the one already in the cover, even a new o-ring would work stacked on the used o-ring in the cover.. I dont think 2 new orings would work as one has to be flat so would stick together easily and not squash or roll out when tightening down ...... then used a thin layer of Permatex ULtra Black and followed the silicone instructions letting it tack up.....worked excellent and used alot less silicone


If you are not happy with the plate the last owner made, I dropped the price to $25.00 shipped for the kit in this thread Doin me no good sitting gathering dust....... I bet once I do sell these 2 kits EVERYBODY is gonna want one....lol




Quote:
Originally Posted by thtanner View Post
Super helpful response; thanks TS.

Rags

P R Customz

http://imageevent.com/radicalrags/prcustomz

TuxedoSeven's Stator Mod https://www.vn750.com/forum/showthrea...t=16839&page=5

Tuxedo style Stator mount plate kits for sale.
$50.00 shipped! PM me and look at link below.
http://imageevent.com/radicalrags/ka...eplacement?n=0

Last edited by Rags; 11-18-2011 at 02:04 AM.
Rags is offline  
post #9 of 381 (permalink) Old 11-18-2011, 01:57 AM Thread Starter
Member
 
Join Date: Apr 2011
Posts: 53
iTrader: (2)
 
Updated price!

Well need to get rid of the 2 Tuxedo Stator Mod kits I made up as I don't know if my pricing was still to high or nobody needs one of these right now........ Will sell each kit for $25.00 shipped.... from $50.00 shipped....aint doin me no good sitting on the shelf in my office

Rags

P R Customz

http://imageevent.com/radicalrags/prcustomz

TuxedoSeven's Stator Mod https://www.vn750.com/forum/showthrea...t=16839&page=5

Tuxedo style Stator mount plate kits for sale.
$50.00 shipped! PM me and look at link below.
http://imageevent.com/radicalrags/ka...eplacement?n=0
Rags is offline  
post #10 of 381 (permalink) Old 11-18-2011, 08:57 AM
Members who have donated towards server costs
 
flitecontrol's Avatar
 
Join Date: Dec 2008
Location: Monroe, LA
Posts: 4,699
iTrader: (14)
 
PM sent. Don't need the compass/scribe BTW, already have one.

I'm keepin' all the left over parts. I'm gonna use 'em to build another bike!
_____________________________________________
"Black Beauty"
1989 VN750 acquired December, 2008, 6,711 miles
Currently 23,298 miles

Old Blue
2001 Honda CMX250 Rebel acquired July, 2008

1987 VN750 project bike, acquired August, 2009, 33,000 miles and balancer sticking out of the case, currently awaiting attention and parts
flitecontrol is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Tags
stator plate , stator plate kit

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Once registered, your User Name"cannot be changed". We can make exceptions within 7 days, but after that, it is set in stone.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome