1999 Wrecked Bike: Parting Out - Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums
Sell or Swap
Got a part you want to sell or looking for a part?
Want to trade for something? Post it in here!

 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 09-05-2011, 01:49 AM Thread Starter
Junior Member
 
Join Date: May 2011
Location: Oklahoma
Posts: 14
iTrader: (0)
 
1999 Wrecked Bike: Parting Out

Hi All,

A few months ago I had an ACCT nightmare that resulted in a destroyed rear piston and head. After keeping my eye out for a few months, I ran across a wrecked '99 VN750 sitting in a guy's barn that I thought I could rob certain engine parts off of, but it looks like that engine may be junk too. Unfortunately the front end is trashed, but I have (or more accurately, will have) quite a few parts available to sell or swap.

This bike was sitting in a barn for 2 years, so almost everything is dirty and I have no idea if the electrical components work or not.

As of now, I am not going to sell any engine components until I make sure I have enough to make mine whole again (or buy one off ebay). Once that is finished I will try to sell the extra stuff.

I spent a few hours pulling most of the salvageable parts off this bike and have them listed below. This list is incomplete, if you are interested my email is [email protected]. I'm not really interested in profiting on this bike as I just bought it for the engine and some of the parts show some wear, but I figured a few of you would be interested in some of this stuff.

-Rear Fender: Grey? (has some markings where the sissy bar and whatnot attaches to the fender, as well as a few scuff marks)
-Rear shocks (Has a few scratches, but they look pretty good)
-Wiring Harness (Some of the connections need to be soldered)
-Front Brake Assembly
-Radiator Cap
-Clutch Assembly
-Tail Light (Has some of the chrome worn off of the plastic)
-Sweet home made sissy bar (it looks like a high school shop project that earned a C+)
-Gas Tank (This thing is smashed pretty good)
-Hacked up tail pipes
-Kick Stand
-Center Stand
-Horns
-Coils
-Foot peg assembly with brake pedal
-Rectifier
-Right and Left Controls
-Brake Master Cylinder
-Chassis
-Swing Arm
-Speedometer, and other various cables.
-TONS of bolts and other random things like cable stays
-There's probably a lot of stuff I missed but this is all I could remember

Regards,

Kris

Edit: I'm in Oklahoma

Last edited by Kilhoffa; 09-05-2011 at 12:01 PM.
Kilhoffa is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 09-05-2011, 08:51 AM
Senior Member
 
johnm's Avatar
 
Join Date: Feb 2010
Location: Owensville, MO
Posts: 278
iTrader: (2)
 
PM sent.

1989 VN750
VROC#31798





I'm bad with names. May I just call you dumb?
johnm is offline  
post #3 of 10 (permalink) Old 09-05-2011, 09:08 AM
Headbanger/Popes of Hell
 
ruger's Avatar
 
Join Date: Aug 2006
Location: ohio
Posts: 6,644
iTrader: (9)
   
how much for the Brake Master Cylinder? but I really only need the part that holds the Brake Master Cylinder to the handle bar where the mirror mounts to. my mirror mount broke off!

thanks.

if it goes vroom or boom, I LIKE IT!
ruger is online now  
 
post #4 of 10 (permalink) Old 09-05-2011, 09:41 AM
Banned
 
Join Date: Mar 2009
Location: Cedar Grove, NC
Posts: 431
iTrader: (0)
 
where are you located?
km60155 is offline  
post #5 of 10 (permalink) Old 09-05-2011, 12:25 PM Thread Starter
Junior Member
 
Join Date: May 2011
Location: Oklahoma
Posts: 14
iTrader: (0)
 
Quote:
Originally Posted by ruger View Post
how much for the Brake Master Cylinder? but I really only need the part that holds the Brake Master Cylinder to the handle bar where the mirror mounts to. my mirror mount broke off!

thanks.
I was hoping to sell the whole front brake assembly, but I suppose I could sell just the font master cylinder. Not sure what it is worth though, there is a little road rash on the lid.

Edit: On a second look you don't want the master cylinder, the part that holds the mirror on was snapped off and the sight glass is sun damaged.


Quote:
Originally Posted by km60155 View Post
where are you located?
I'm in Oklahoma City

Last edited by Kilhoffa; 09-05-2011 at 12:50 PM.
Kilhoffa is offline  
post #6 of 10 (permalink) Old 09-05-2011, 06:49 PM
Member
 
waynebo37's Avatar
 
Join Date: Jun 2004
Location: Clarkston, WA (Beautiful Pacific Northwest)
Posts: 84
iTrader: (2)
 
PM sent regarding driver's footpeg.

Wayne Manwaring aka: Waynebo37
Clarkston, WA
'01 Vulcan 750
F&S Extended Passenger Backrest
Memphis Shades Santa Cruz 'shield
Throttle Rocker
Vista Cruise Throttle Lock
Tourmaster Studded Slanted 'bags
Dianna Ride Bell
DeGoated, then ReGoated
K&N Air Filters
Custon VN Grille Guard
Misc. add-ons
waynebo37 is offline  
post #7 of 10 (permalink) Old 09-05-2011, 10:36 PM
Member
 
hwyenginr's Avatar
 
Join Date: Aug 2011
Location: Washington State
Posts: 65
iTrader: (4)
 
How much for the C+ sissy bar with shipping to "98584"
Thanks

92 Vulcan 750
Saddle Bags
Windshield
Extended Backrest
ProTac Drivers Backrest
hwyenginr is offline  
post #8 of 10 (permalink) Old 09-06-2011, 02:29 PM
Old Truck Junkie
 
niterider's Avatar
 
Join Date: Jul 2007
Location: Roby Texas
Posts: 4,133
iTrader: (15)
 
I need the hardware that holds the mufflers in place. I need the grommets and bolt and nuts and the chrome washer for both sides. I don't need the parts for the goats belly.
Thanx

02 honda sabre 1100
niterider is offline  
post #9 of 10 (permalink) Old 09-06-2011, 03:51 PM
2000 VN 750 Senior Member
 
Join Date: Sep 2010
Location: Central New Jersey
Posts: 2,494
iTrader: (10)
   
I am looking for one or possibly two (one for a spare) chrome caps for the swing arm Shipping would be to 08824 (NJ). Let me know availablility and total cost please.

Tom
Vulcan 2000
Vulcan2000 is offline  
post #10 of 10 (permalink) Old 09-28-2011, 12:27 AM
Members who have donated towards server costs
 
OldHipWesTex's Avatar
 
Join Date: Sep 2011
Posts: 306
iTrader: (1)
 
Send a message via Yahoo to OldHipWesTex
Im looking for a seat for my Vn


Vulcan #1 1993 - 28K
Vulcan #2 1999 - 26k
It All Comes Down To 3 Things:
#1 Fuel
#2 Spark
#3 Mechanical
Any One Fails - Then It Dont Run

____________________________________

ANTICIPATED MODS:
Build Fiberglass Fenders F/R
Mold & Cast New Turn Signals Lights
OldHipWesTex is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Once registered, your User Name"cannot be changed". We can make exceptions within 7 days, but after that, it is set in stone.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome